LG WM2277H Series - Installation Instructions; Shipping Bolts Handling; Removing Shipping Bolts

INSTALLATION INSTRUCTIONS
A WARNING ; Two or more people may be need to install and move the appliance.
Install or store unit where it uill not be exposed to tempenitures below freeziof' or
exposed to outside weather conditions.
Pn)perly ground washer to conform with ail g<ivemin^ codes and ordinances.
To reduce the risk of electric shock, do not install the washer in humid spaces.
The base opening must not be obstructed b}' carpeting when the washing machine is installed on a carpeted llo<»r.
In countries where there are areas which ma> be subject to infestation bv cockroaches or other vermin, pay
IMirlicuiar attention to keeping the appliance and its surroundings in clean condition at all times.
Damage caused by cockntaches or other vermin will not be covered by the appliance warranty.
■ Shipping bolts
The appliance is fitted with shipping bolts to prevent
internal damage during transportation.
Packing and all shipping bolts must be removed
before using the washer.
cv When unpacking the base, be sure to remove
the additional packing support in the middle of
the base packing.
Washer
Packing Support
Packing
Wrench
■ Removing shipping bolts
1. To prevent internal damage during transport,
4 locking bolts are installed. Before operating
the washer, remove the bolts and braces.
• If they are not removed, it may cause severe
vibration, noise, and malfunction.
3. Take out the 4 bolts and braces by twisting
the braces slightly. Keep the 4 bolts, braces
and the wrench for future use.
• Whenever the appliance is transported, the
shipping bolts and braces must be reinstalled
2. Unscrew the 4 bolts with the wrench supplied. 4. Close the holes with the caps supplied.
Do first lower side to remove easily. One of the
bolts retains the power cord of the washer to
prevent operating without removing bolts.
5
ENCLISH