HOW TO USE .....: THEWASHER :
5. Custom Program
i itll,
•Custom Program allows you to store a customized
wash cycle for future use,
• ]-0 itlake a _lt,qtOlll Program:
1. Select a cycle
2 Select Wash/Rinse Temperature, Spin Speed,
and Suit Level.
3 Select other desired Options
4 Press and hold Custom Program button 3
seconds (2 beep sounds)
"The Custom program is now stored for future
use To reuse the program, select Custom
Program and press Start/Pause (?_,
i ii iilllllllllllllllllll ii,,i,
6. Wash/Rinse Temperature
• Select a water temperature based on the type of
load you are washing
. Fo{tow the fabric care label and chart below for
best results,
S.ggo,tedW h emp.,
ExtraHot Kitchentowels, sheets,
;67°F (75°C) and baby garments
..... Hot • Whites and HeaVY
:I22°F (50°C) ' : suitedcolor-fastitems
Warm Most loads
104°F (40°C)
: :: :Cod Bdgbtlycol0red items,
: : 77OF(25°C) washabtewoolens
-Warm rinses leave the loads dryer than cold
rinses Warm rinses increase wfinklingo
. In cold climates, a warm rinse makes the load
more comfortable to handle
. Cold rinses save energy.
•The Cold rinse temperatures depend on the cold
water at your faucet
•Warm rinses are regulated at approximately
86°F (3O°C)
• For the Tap CoSd/Cold setting, both wash and rinse
temperatures depend on the cold water at your
faucet
7. Spin speed
-To change the spin speed, press the Spin Speed
button repeatedly to cycle through available
options
• To start DrainlS£in cycle:
1 Press Power _,'e)button to turn on
2 Press Spin Sl_ed button only
3 Press Start/Pause r_.'_)button
8. Soil Level
L J JH J Ull ,uJJ_
• To change the soil level, press the Soil Level
button repeatedly until the desired setting is on,
9. Beeper
ill i i,ml,
• Press repeatedly to adjust the volume of the
Beeper
I5
To Next Page
Loading...
