LG WM3170CW - Adding Extra Water

27
ENGLISH
USING YOUR WASHING MACHINE
Adding Extra Water to the Wash and Rinse
Cycles, Water Plus
You can rinse the load more thoroughly by
adding extra water to the wash and rinse cycles.
1 Press
A
and turn
B
to the desired cycle.
2
Press
.
- The indicator light will turn on.
3
Go to step 4 to accept the default settings
without changing the options. Press the cycle
modifier buttons to change the cycle settings
if desired. Press the option buttons to add
options if desired.
4
Press
C
.
Saving energy, Cold Wash™
Adding the Cold Wash™ option reduces
energy usage and provides the same washing
performance as a warm water wash.
By using six different washing motions (Tumbling,
Rolling, Stepping, Scrubbing, Swing, Filtration),
fabrics get the cleaning benefits, without the
energy usage.
1 Press
A
and turn
B
to select the desired
cycle.
2
Press . The washer will automatically
adjust the cycle settings.
3
Set any other desired options.
4
Press
C
.
NOTE
y
When you select the Cold Wash™ option,
wash time will be increased up to 10
minutes.
y
For high wash efficiency, use this option
with less than 8 pounds (3.6 kg) of laundry
(approximately 8 thick towels).
Setting options during the cycle
You can add desired options during the wash
cycle.
Button lock feature, Child Lock
You can lock the washing machine to prevent
children or others from changing the cycle
settings by pressing the buttons during the cycle.
To enable child lock
Press and hold for three seconds during
the wash cycle.
- When the Child Lock is enabled, a
N
message
and the remaining wash time are displayed,
in turn, on the display panel of the washing
machine.
To disable child lock
(When the Child Lock is activated.)
Press and hold for three seconds during
the wash cycle.
NOTE
y
Child Lock remains active after the cycle
ends. To cancel Child Lock, turn the washer
on and then press and hold the PreWash
button for three seconds.