LG WM3270C SERIES - Signal; Pre Wash; Rinse+Spin; Extra Rinse

26
OPERATION
Signal
The washing machine plays a melody when the
wash cycle is finished. The buttons make a sound
each time a button is pressed. Use this option to
adjust the volume of the melody and button tones.
1
Press
A
.
2
Turn
B
to the desired cycle.
3
Press . Adjust the melody and button tones
as desired.
4
Modify other cycle settings and add desired
options or proceed to step 5 to begin the cycle.
5
Press
C
.
Pre Wash
Prewash for 15 minutes when clothes are covered in
dirt or dust. This feature is suitable for heavily soiled
items.
1
Press
A
and turn
B
to the desired cycle.
2
Press .
- light will turn on.
3
Modify other cycle settings and add desired
options or proceed to step 4 to begin the cycle.
4
Press
C
.
Rinse+Spin
Use this cycle to rinse detergent from load.
1
Press .
2
Modify other cycle settings and add desired
options or proceed to step 3 to begin the cycle.
3
Press
C
.
Extra Rinse
You can add an extra rinse cycle to the default rinse
cycle.
1
Press
A
and turn
B
to the desired cycle.
2
Press .
- light will turn on.
3
Modify other cycle settings and add desired
options or proceed to step 4 to begin the cycle.
4
Press
C
.
Delay Wash
Set the desired start time for a cycle.
1
Press
A
and turn
B
to the desired cycle.
2
Modify cycle settings and add desired options or
proceed to step 3 to set the cycle start time.
3
Press repeatedly to select the desired start
time.
- light will turn on.
- The set start time appears on the display panel.
- Each press of the button increases the delay
time by one hour, up to 19 hours.
4
Press
C
.