To Next Page
H
Holly GarciaAug 12, 2025
What to do if my LG Washer shows an IE INLET ERROR?
- PPatrick GarciaAug 12, 2025
An IE INLET ERROR on your LG washer usually indicates a water supply issue. Here's what to check: 1. Ensure that the water supply faucets are fully open. 2. Make sure the water inlet hoses aren't kinked, pinched, or crushed, especially behind or under the washer. 3. If you're using leak-limiting hoses, try standard hoses instead, as leak-limiting hoses can sometimes cause false trips and prevent filling. 4. Check another faucet to ensure adequate household water pressure. Disconnect the water inlet hoses from the washer and run a few gallons of water through them to flush out any dirt. If the flow remains low, contact a plumber to repair the water supply lines.
General
