A
Angela WilliamsSep 23, 2025
What does dHE DRY ERROR mean on LG Washer?
- KKevin WilliamsSep 23, 2025
The dHE DRY ERROR on your LG washer indicates that the dryer function is not working (on washer/dryer combination models). Call for service.

What does dHE DRY ERROR mean on LG Washer?
The dHE DRY ERROR on your LG washer indicates that the dryer function is not working (on washer/dryer combination models). Call for service.
How to fix an LG Washer that will not turn on?
If your LG washer won't turn on, start by ensuring the power cord is properly plugged into a grounded outlet. Also, check your house fuse or circuit breaker; reset the breaker or replace the fuse if necessary.
How to fix UE UNBALANCE ERROR on LG WM4500HBA?
If you're getting a UE UNBALANCE ERROR on your LG washer, it means the load is unbalanced. Try these solutions: if the load is too small, add additional items to help balance it. If you're washing heavy items with lighter ones, separate them into similar weight categories. If the items are tangled, manually redistribute them in the drum.
Why is my LG Washer leaking water?
If your LG washer is leaking water, inspect the hoses and connectors for any leaks, cracks, or splits. If the house drain pipes are clogged, contact a plumber. Ensure the drain hose is properly inserted into the drain connector and is secured to prevent it from coming out during the drain cycle. Also, reduce the amount of detergent used, especially for small or lightly soiled loads, as excessive sudsing can cause leaks.
What to do if water in my LG WM4500HBA doesn't drain or drains slowly?
If the water in your LG washer isn't draining properly or is draining slowly, check the drain hose for clogs or kinks and ensure it's free. Also, make sure the end of the drain hose is not more than 96 inches (2.4 m) above the bottom of the washer; if it is, lower it.
What does FF FROZEN ERROR mean on LG Washer?
The FF FROZEN ERROR on your LG washer means that the inlet hose, drain hose, or drain pump is frozen. Refer to the 'Care in Cold Climates' section for guidance.
What does PE PRESSURE SENSOR ERROR mean on LG WM4500HBA Washer?
The PE PRESSURE SENSOR ERROR on your LG washer indicates that the water level sensor is not working correctly. Close the water faucets, unplug the washer, and call for service.
What does tcL TUB CLEAN ALARM mean on LG WM4500HBA?
The tcL TUB CLEAN ALARM on your LG washer is not an error code. It indicates that the Tub Clean cycle is running or needs to be run.
What does FE OVERFLOW ERROR mean on LG WM4500HBA?
The FE OVERFLOW ERROR on your LG washer indicates that the water level is too high, likely due to a faulty water valve. Close the water faucets, unplug the washer, and call for service.
How to resolve OE WATER OUTLET ERROR on LG Washer?
To resolve an OE WATER OUTLET ERROR on your LG washer, first check the drain hose for any kinks, pinches, or clogs. Also, ensure that the end of the drain hose is not positioned more than 96 inches (2.4 m) above the bottom of the washer.
| Style | front load; front load washer; electric |
|---|---|
| Color | black steel (b) |
| Washer Capacity | 5 cu. ft. |
| Max Spin Speed | 1, 300 |
| Spin Speeds | 5 |
| Number of Cycles | 14 |
| Number of Options | 15; turbowash®, steam, fresh care, pre-wash, remote start, delay wash, wi-fi, add item, extra rinse, control lock, drum light, coldwash, spin only, detergent level, softener level |
| Temperature Settings | 5; extra hot, hot, warm, cold, tap cold |
| Water Levels | load sensing |
| Soil Levels | 5 |
| Control Panel | digital and knobs; plastic |
| Cycle Signal | yes |
| Interior Light | no |
| Steam | yes |
| LoadSense | yes |
| Dispenser | ezdispense cartridge(detergent, softener), main wash, bleach(cup) |
| Add Wash | yes |
| Soak Settings | no |
| Remote Control | yes |
| Wi-Fi | yes |
| Electrical Requirements | 120v, 10 amps |
| Voltage | 120 volts |
| Current | 10 |
| Dimensions | 27" x 39" x 33 1/4" |
|---|---|
| Depth | 33 1/4 inch |
| Height | 39 inch |
| Width | 27 inch |
| Net Weight | 201.5 / 215.2 lbs |