How to resolve OE WATER OUTLET ERROR on LG WM4000HBA Washer?
To resolve an OE WATER OUTLET ERROR on your LG washer, first check the drain hose for any kinks, pinches, or clogs. Also, ensure that the end of the drain hose is not positioned more than 96 inches (2.4 m) above the bottom of the washer.
What to do if my LG WM4000HBA shows an IE Inlet Error?
If your LG Washer displays an IE Inlet Error, it could be due to several reasons. First, ensure that the water supply faucets are fully open. Check that the water inlet hoses are not kinked, pinched, or crushed behind or under the washer. Also, clean the water inlet filters, and verify that your household water pressure is adequate by checking another faucet. Finally, avoid using leak-limiting hoses for the water supply connection, as they are not recommended.
How to fix an LG WM4000HBA that will not turn on?
If your LG washer won't turn on, start by ensuring the power cord is properly plugged into a grounded outlet. Also, check your house fuse or circuit breaker; reset the breaker or replace the fuse if necessary.
How to fix UE UNBALANCE ERROR on LG WM4000HBA?
If you're getting a UE UNBALANCE ERROR on your LG washer, it means the load is unbalanced. Try these solutions: if the load is too small, add additional items to help balance it. If you're washing heavy items with lighter ones, separate them into similar weight categories. If the items are tangled, manually redistribute them in the drum.
Why is my LG Washer leaking water?
If your LG washer is leaking water, inspect the hoses and connectors for any leaks, cracks, or splits. If the house drain pipes are clogged, contact a plumber. Ensure the drain hose is properly inserted into the drain connector and is secured to prevent it from coming out during the drain cycle. Also, reduce the amount of detergent used, especially for small or lightly soiled loads, as excessive sudsing can cause leaks.
What does tE TEMPERATURE SENSOR ERROR mean on LG Washer?
The tE TEMPERATURE SENSOR ERROR on your LG washer indicates a control error. Unplug the washer, wait 60 minutes, reconnect the power, and try again.
Why does my LG Washer make a thumping sound?
A thumping sound in your LG washer may occur due to heavy wash loads; stop the washer and redistribute the load. It can also happen if the wash load is out of balance; pause the cycle and redistribute the load after the door unlocks.
What does LE MOTOR LOCKED ERROR mean on LG WM4000HBA?
The LE MOTOR LOCKED ERROR on your LG washer indicates a motor error. Allow the washer to stand for 30 minutes, then restart the cycle.
How to stop loud banging noises while LG Washer is filling with water?
Loud banging noises while your LG Washer is filling with water can be due to the plumbing in your home. A suggested solution is installing a water hammer arrestor. You can purchase add-on arrestors at your local hardware or home improvement store.
How to disable CL CONTROL LOCK FUNCTION on LG WM4000HBA Washer?
The CL CONTROL LOCK FUNCTION on your LG washer is on to prevent changes to cycles or operation. Turn off the Control Lock function in the control panel.
General| Type | Front Load Washer |
|---|---|
| Capacity | 4.5 cu. ft. |
| Spin Speed | 1300 RPM |
| Energy Star Certified | Yes |
| Color | Black Steel |
| Smart Features | Yes |
| Steam | Yes |
| Washer Cycles | 14 |
| Number of Wash Temperatures | 5 |
| Noise Level (dB) | 52 dB |
| Cycle Time | Varies by cycle |
| TurboWash 360 | Yes |
| Dimensions | 27" W x 39" H x 30.25" D |
| Options | Delay Wash |
General guidance on reading safety instructions, warning statements, and caution statements.
Detailed steps for connecting the hot and cold water supply hoses.
Instructions for connecting the drain hose to a standpipe or laundry tub.
Procedures for leveling the washer and draining into a laundry tub.
Explanation of control panel buttons like Power, Cycle Selector, and Start/Pause.
Initial checks, troubleshooting FAQs, and error message explanations.
Detailed solutions for various error codes displayed by the washer.
Identifying causes and solutions for different types of noises the washer may make.
Resolving problems like water leaking, excessive sudsing, and power issues.
Continued troubleshooting for operational issues including water supply and controls.
Resolving issues with water filling, slow draining, and bleach dispensing.
Addressing performance problems such as wrinkling, staining, and odors.
Solutions for persistent odors and Wi-Fi connection problems.
To Next Page
