LG WM8100 - Page 21

21
ESUACMOTPMYSRORRE
LOCKED MOTOR
ERROR
EEPROM ERROR
• The connector (3-pin, male, blue) in the MOTOR
HARNESS is not connected to the connector (3-pin,
female, blue) of STATOR ASSEMBLY.
• The electric contact between the connectors (3-pin,
male, blue) in the MOTOR HARNESS and 3-pin,
female, gray connector in the MAIN PWB
ASSEMBLY is bad or unstable.
• The MOTOR HARNESS between the STATOR
ASSEMBLY and MAIN PWB ASSEMBLY is cut
(open circuited).
8
• EEPROM is out of order.
Displayed only when the START/PAUSE button is
first pressed in the Load Test Mode.
9
gnihsaw elihw deppots si ylppus rewop eht retfA•ERULIAF REWOP
machine is working, the power is supplied rapidly.
10
If the washing machine detects too many suds,
it displays this error code and adds a Suds Reducing
cycle. This adds about two hours to the cycle time.
If too many suds are detected during spinning, the
washing machine stops to help prevent leaking.
•Suds Error
11
LGE Internal Use Only
Copyright © 2016
~ 2017 LG Electronics Inc. All rights
reserved. Only training and service purposes.