49
PUMP
Disassemble the cabinet cover.
Separate the pump hose, the bellows, the
circulation hose assembly from the pump
assembly.
Disassemble the pump assembly.
HEATER
Disassemble the cabinet cover.
Separate 2 connectors from the heater.
Loosen the nut and pull out the heater.
CAUTION
• When assembling the heater, insert the
heater into the heater clip on the bottom of
the tub.
• Tighten the fastening nut so the heater is
secure.
CIRCULATION
HOSE
PUMP HOSE
BELLOWS
1
2
3
1
2
3
LGE Internal Use Only
Copyright © 2016
~ 2017 LG Electronics Inc. All rights
reserved. Only training and service purposes.
To Next Page
Loading...
