26
the
Use app
deterge
When w
mild de
for was
For add
quantity
detergen
instructi
Washing
Programs
Add
the
laundry
WOOL
Use this program for washing woolens.
(wash only “water washable” clothes)
Jean Wash
Use jeans program when washing
heavy, thick, and extremely dirty
laundry such as jeans and work
outfits.
Soak Wash
Use this mode for washing heavily dirty
laundry by soaking in water for some
time to remove proteins and fats.
SPEEDY
Use this mode when washing lightly
soiled clothes for a short time.
Select the
WOOL
program on the
Control panel.
Select the
DELICATE
program on the
Control panel.
The inner-tub rotates for 10
seconds to detect the laundry
load.
Then the Water Levels and the
amount of detergent to be used
will be shown and water will
be supplied.
Select the
SPEEDY
program on the
Control panel.
Select the Jean
program on the
Control panel.
Select the
desired program
(Not available
for “WOOL” &
“ DELICATE”
program).
DELICATE Wash
Use this program for washing delicate
fabrics such as lingerie.
Before washing your woolens check the
care label for the washing instructions.
(wash only “water washable” clothes)
It is normal to wash lower water level before the main wash.
• Press ‘WASH’ button until ‘Soak 80’ lights on.
• Wash time except soak is changeable to 20, 30 by
pressing ‘WASH’ button
• Select No. of rinse and spin time by pressing button.
• ‘DELAY’ light is blinking and left time
is displayed.
Normal Washing
Used for normal loads, this mode
automatically selects the most
appropriate conditions and completes
the sequence in one operation. The
built-in sensor detects the size of the
load and the ideal wash power and
wash, rinse and spin times are set
accordingly
■ WT-R902