What does it mean if my LG WT1101CW Washer displays an error related to the water level sensor?
J
jessicagainesSep 2, 2025
If your LG Washer displays an error code related to the water level sensor, close the water taps, unplug the washer, and call for service.
M
Matthew LewisAug 23, 2025
Why my LG Washer will not turn on?
M
madison61Aug 23, 2025
If your LG Washer won't turn on, ensure the power cord is securely plugged into a grounded, 3-prong, 120-VAC, 60-Hz outlet. Also, check your house fuse or circuit breaker and reset it or replace the fuse if necessary. Do not increase fuse capacity. If a circuit overload is the problem, have it corrected by a qualified electrician.
S
Savannah BishopAug 31, 2025
What to do if my LG Washer displays a lid lock error?
K
Kevin BowmanAug 31, 2025
If your LG Washer displays an error code related to the lid lock switch, make sure that the lid is closed properly and press the START/PAUSE button. The washer will not spin unless the lid is locked (LID LOCK light will turn on).
S
Sarah JonesAug 30, 2025
Why does my LG Washer display an error when the lid is open?
G
grossalbertAug 30, 2025
If your LG Washer displays an error code and the lid is not closed properly, make sure that the lid is closed properly and press the START/PAUSE button. After starting a cycle, it may take a few moments before the drum begins to turn or spin. The washer will not spin unless the lid is locked (LID LOCK light will turn on).
B
Billy DouglasAug 29, 2025
How to fix slow drain on LG WT1101CW?
U
umillerAug 29, 2025
If water in your LG Washer drains slowly or not at all, ensure the drain hose is free of clogs, kinks, and is not pinched behind or under the washer.
M
Melissa AndersonAug 28, 2025
Why is my LG Washer filling with water slowly?
D
daniel33Aug 28, 2025
If your LG Washer is filling slowly or not at all, check the following:
* Make sure the water supply taps are fully open.
* Ensure the water line hoses are not kinked, pinched, or bent, especially after moving the washer.
* Clean the water inlet filters. See the Care and Cleaning section.
* Verify that your household water pressure is adequate by checking another faucet in the house.
L
Laura George DVMAug 27, 2025
What to do if LG Washing machines not filling property?
G
ggardnerAug 28, 2025
If your LG washer is not filling properly, ensure the filters (blue and orange screens) are free of solids. Turn off the water and check the filter by disconnecting the hose at the machine. Also, check that the fill hoses are not kinked or clogged. Make sure that the water supply is turned on and the faucets are completely open. The washer lid must be closed for all cycle operations. Ensure the hot water supply connects to the hot inlet and the cold water supply connects to the cold inlet.
F
fbridgesAug 27, 2025
Why LG Washing machines will not drain water?
U
uharrisAug 27, 2025
If your LG washing machine won't drain water, make sure that the drain hose is not kinked. Also, the drain outlet should not be higher than 8 feet above the floor, according to the installation instructions.
T
Troy RileyAug 26, 2025
Why is my LG Washing machines leaking water?
P
Patrick RobertsAug 27, 2025
If you notice water leaking around your LG washing machine, check the following:
* Ensure that the fill hose connections are tight at both the tap and the washer.
* Inspect the house drain pipes for clogs. If necessary, contact a plumber to unclog them.
* If you're washing large items, make sure to use the BULKY/BEDDING cycle and position the items correctly in the tub.
D
Daniel JonesAug 25, 2025
How to fix an LG Washing machines that will not turn on?
A
andrewharrisAug 26, 2025
If your LG washing machine won't turn on, here are some things to check:
* Make sure the power cord is securely plugged into a grounded, 3-prong, 120-VAC, 60-Hz outlet.
* Check your house fuse or circuit breaker and reset or replace if necessary. It is recommended to have a dedicated circuit for the washer.
* If the display doesn't come on and the washer has been exposed to freezing temperatures, allow it to warm up before pressing the POWER button.