To Next Page
W
Whitney MartinSep 23, 2025
What to do if my LG WT1201C display shows: Thermistor error?
- BBrenda SpearsSep 23, 2025
If your LG washer displays a thermistor error, unplug the washer and call for service.
What to do if my LG WT1201C display shows: Thermistor error?
If your LG washer displays a thermistor error, unplug the washer and call for service.
Why is my LG Washer filling with water slowly?
If your LG Washer is filling slowly or not at all, make sure the water supply taps are fully open and that the water line hoses aren't kinked or pinched. Clean the water inlet filters, referring to the Care and Cleaning section for instructions. Also, check another faucet in your house to ensure adequate household water pressure.
Why is my LG Washer not turning on?
If your LG washer isn't turning on, it could be due to a few reasons. First, ensure the power cord is securely plugged into a grounded, 3-prong, 120-VAC, 60-Hz outlet. Also, check your house fuse or circuit breaker; reset the breaker or replace the fuse if needed, but do not increase the fuse capacity. If a circuit overload is the issue, consult a qualified electrician.
How to fix the uE error on my LG WT1201C Washer?
If your LG washer displays a uE error, it means the rebalancing was unsuccessful. This can happen because the load is too small, in which case you should add more items to help balance the load. It can also occur if heavy articles are mixed with lighter items; try to wash items of similar weight together. If articles have become tangled, manually redistribute the load.
What does it mean when my LG WT1201C Washer display shows: Lid lock switch error?
If your LG washer displays a lid lock switch error, ensure that the lid is closed properly and press the START/PAUSE button. The washer will not spin unless the lid is locked, which is indicated by the LID LOCK light turning on. If the error message persists even when the lid is closed, it is recommended to call for service.
What to do if my LG Washer display shows: Thermal overload protection circuit in the motor has been tripped?
If your LG washer displays a message indicating that the thermal overload protection circuit in the motor has been tripped, allow the washer to stand for 30 minutes to cool the motor. After waiting, restart the cycle. If the LE error code persists, unplug the washer and call for service.
What does thermistor error mean on LG WT1201C Washer?
If your LG Washer displays an error, unplug the washer and call for service.
What to do if my LG WT1201C Washer display shows: If an error message is displayed for 4 minutes, the water in the tub will automatically drain?
If your LG washer displays a message indicating that the water in the tub will automatically drain if an error message is displayed for 4 minutes, this is normal behavior.
Why is water in my LG Washer draining slowly?
If water in your LG washer is draining slowly or not at all, make sure the drain hose is free of clogs, kinks, etc., and is not pinched behind or under the washer.
What does it mean when my LG WT1201C display shows: The washer has detected an out of balance load?
If your LG washer displays a message indicating an out-of-balance load, it means the washer is trying to rebalance the load by adding water and redistributing the items automatically. This display is for your information, and no action is required on your part.
Basic safety precautions to reduce risk of fire, electric shock, or injury when using the appliance.
Details on how to properly ground the washing machine to prevent electric shock.
Safety guidelines specific to the installation of the washing machine.
Outlines the sequence of installation steps and critical safety warnings.
Steps to ensure the washer is level for optimal performance.
Guide to connecting power and performing a test run.
Explains error codes and their corresponding corrective actions.
Covers warranty period, scope, exclusions, and service for US customers.
Covers warranty period, scope, exclusions, and service for Canadian customers.
General| Style | Top-Loading |
|---|---|
| Color | Chrome |
| Washer Capacity | 4.3 cu ft |
| Dryer Capactity | - |
| Max Spin Speed | 1100 RPM |
| Spin Speeds | Low |
| Spin Class | C |
| Number of Cycles | 8 |
| Cycle Selections | Mixed 40° |
| Wash | Quick Wash |
| Options | ColdMotion technology |
| Hours | Extra Power / Boost Option |
| Noise level | |
| Temperature Selections | Cold |
| Energy Class | - |
| Annual Energy Consumption | - |
| Annual Water Consumption | - |
| Water Consumption Per Cycle | - |
| Voltage | 120 V |
| Frequency | - |
| Current | 10 A |
Weight and Dimensions| Depth | 28 3/8 in |
|---|---|
| Height | 40 5/32 in |
| Width | 27 in |
| Net Weight | 134.2 lbs |
