Why are there black or gray marks on clothes after washing in my LG WT17WSBP?
Black or gray marks on clothes after washing in your LG Washer can be due to: * A buildup caused by the interaction of fabric softener. You should follow recommendations against scrud (waxy buildup). * Using the incorrect amount of detergent for the load size, soil amount, and water hardness. Make sure to use the correct amount.
How to remove yellow or brown rust stains from clothes washed in my LG WT17WSBP Washer?
Yellow or brown rust stains on clothes washed in your LG Washer may be caused by iron or manganese in the water supply, pipes, or water heater. To address this: * Use a rust remover that is safe for the fabric to restore discolored white loads. * Before washing, run the water for a few minutes to clear the lines.
Why are there holes, tears, or snags in clothes after washing in my LG WT17WSBP?
Holes, tears, or snags in clothes after washing in your LG Washer can be caused by: * Incorrect use of chlorine bleach. Never pour chlorine bleach directly onto fabric. * Sharp objects left in pockets. Make sure to remove all objects from pockets before washing.
How to reduce lint on clothes after washing in my LG Washer?
To reduce lint on clothes after washing in your LG Washer: * Make sure you are not overloading the washer. * Remove tissues from pockets before washing.
What causes blue stains on clothes washed in my LG WT17WSBP Washer?
Blue stains on clothes washed in your LG Washer can be caused by undiluted fabric softener dispensed directly onto the fabric.
General| Type | Top Load Washer |
|---|---|
| Capacity | 17 kg |
| Energy Rating | 4 Stars |
| Spin Speed | 700 RPM |
| Steam | Yes |
| Motor Type | Inverter Direct Drive |
| Noise Level (Wash/Spin) | 72dB |
| Dimensions (WxDxH) | 600 x 600 x 850 mm |
To Next Page
