To Next PageTo Next PageWhat to do if LG Washer will not drain water?
If your LG washer will not drain water, ensure that the drain hose is not kinked. Also, make sure that the drain hose is no higher than 1.2 m above the bottom of the washing machine.
Why is my LG Washer not filling properly?
If your LG washer isn't filling properly, make sure the inlet filters on the fill valves are not clogged. Check that supply hoses are not kinked or clogged. Ensure that both hot and cold water taps are turned on all the way. Verify supply hose connections, because hot and cold supply hoses may be reversed.
What to do if my LG WT17WSBP Washer is leaking water?
If your LG washer is leaking water, check the supply hose connections at both the tap and the washing machine to ensure they are tight and the hoses aren't cracked or split. Also, inspect the house drain pipes for clogs, especially if water is backing up during the drain cycle; a plumber may be needed to repair clogged drain pipes. Make sure the drain hose is properly installed and secured to prevent it from coming out during draining. Finally, ensure that large items like pillows or blankets aren't above the top of the drum, as this can also cause leaks.
General| Type | Top Load Washer |
|---|---|
| Capacity | 17 kg |
| Energy Rating | 4 Stars |
| Spin Speed | 700 RPM |
| Steam | Yes |
| Motor Type | Inverter Direct Drive |
| Noise Level (Wash/Spin) | 72dB |
| Dimensions (WxDxH) | 600 x 600 x 850 mm |
Defines WARNING and CAUTION symbols indicating potential risks and consequences of misuse.
Specifies safety requirements for appliance use by persons with reduced capabilities and need for supervision.
Covers safety aspects related to operating, transporting, and installing the washing machine safely.
Outlines safety precautions for operating the appliance, including control panel use and maintenance.
Warns against using flammable substances near the appliance and precautions for water leaks.
Provides safety instructions for cleaning the appliance and its safe disposal.
General requirements for selecting a suitable installation location for the appliance.
Recommendations for selecting a suitable, stable, and flat installation site for the appliance.
Steps to lock and unlock the appliance's control panel to prevent unauthorized changes.
General advice and self-help steps before calling LG Electronics service centre for assistance.
Lists common error codes (dE, dL, dr) with their causes and solutions.
Troubleshooting steps for the IE error related to water supply issues.
Troubleshooting LE I (foreign object), DE (outlet), and UE (unbalance) errors.
Resolving sensor (LE, FE, PE), motor (LE), and clutch (AE) errors.
Addressing the tcl alarm indicating the need for the Tub Clean function.
Troubleshooting the E3 error indicating a problem with the drain motor.
Understanding CL as a function, not an error, and how to manage it.
Identifying causes and solutions for rattling, thumping, and vibrating noises during operation.
Troubleshooting common operational problems like the appliance not powering on or operating.
Resolving issues with water supply, controls, circuit breakers, and low water pressure.
Diagnosing and fixing problems related to detergent not being dispensed correctly.
Identifying and resolving causes of water leakage from the appliance.
Troubleshooting water leakage, filling, and drainage problems.
