To Next PageTo Next PageHow to reduce lint on clothes after washing in my LG Washer?
To reduce lint on clothes after washing in your LG Washer: * Make sure you are not overloading the washer. * Remove tissues from pockets before washing.
Why are there holes, tears, or snags in clothes after washing in my LG WT17WSBP?
Holes, tears, or snags in clothes after washing in your LG Washer can be caused by: * Incorrect use of chlorine bleach. Never pour chlorine bleach directly onto fabric. * Sharp objects left in pockets. Make sure to remove all objects from pockets before washing.
Why is my LG Washer not operating?
Several factors can prevent your LG washer from operating. First, the control panel might have powered off due to inactivity, which is normal; press the POWER button to turn it on. Ensure the washer is securely plugged into a working outlet. Check that the water supply is turned on fully. Make sure the cycle was set correctly, the door is closed properly, and then press the START/PAUSE button. Also, verify that the circuit breaker/fuse hasn't tripped or blown. If these steps don't work, try resetting the control by pressing the POWER button, reselecting the cycle, and pressing START/PAUSE again. Extremely low water pressure or a washing machine that is too cold can also prevent operation. Note that during certain cycles, the drum may stop temporarily while water is being heated.
Why are there black or gray marks on clothes after washing in my LG WT17WSBP?
Black or gray marks on clothes after washing in your LG Washer can be due to: * A buildup caused by the interaction of fabric softener. You should follow recommendations against scrud (waxy buildup). * Using the incorrect amount of detergent for the load size, soil amount, and water hardness. Make sure to use the correct amount.
Why does my LG Washer show a dL DOOR LOCK ERROR?
The dL DOOR LOCK ERROR on your LG Washer typically means the door isn't locking correctly. Check for obstructions like clothing or shipping materials that might be caught under the door. Ensure nothing is preventing the door from closing completely. If the error continues after ensuring the door is clear and fully closed, call for service.
What to do if my LG Washer displays a dE DOOR ERROR?
The dE DOOR ERROR on your LG Washer indicates a problem with the door. It may appear because the door is not closed properly or because the door was opened during operation. Ensure the door is completely closed. If the error persists, call for service. If the door was opened during a cycle, press Start/Pause to cancel the error, then press Start/Pause again to restart the wash programme.
How to fix poor stain removal in LG WT17WSBP Washer?
If your LG washer isn't removing stains effectively, it could be due to improper option selection. For heavier soils and tougher stains, select the Remojo (Soak) feature to boost the cleaning power of the selected cycle. Also, previously washed articles may have stains that have already set, making them difficult to remove. These may require hand washing or pretreating.
Why does my LG Washer vibrate so much?
Excessive vibration in your LG washer can be caused by a few things. First, make sure all packaging materials have been removed. An unevenly distributed wash load can also cause vibration; pause the cycle and redistribute the load after the door unlocks. Check that all leveling feet are resting firmly and evenly on the floor; refer to the 'Leveling the Appliance' section for instructions. Finally, ensure the floor is solid and doesn't flex; refer to the 'Installation Place Requirements' section.
What to do if there's detergent residue on clothes after washing in my LG WT17WSBP?
If you notice detergent residue on your clothes after washing in your LG Washer, consider the following: * Ensure you are not overloading the washer. * Check if the detergent needs to be pre-dissolved according to its instructions. * Try pre-dissolving the detergent before adding it to the washer. * Increase the water temperature, using hot water if safe for the fabric.
How to improve soil removal in my LG WT17WSBP Washer?
To improve soil removal when using your LG Washer: * Use the correct amount of detergent, considering the load size, soil amount, and water hardness. * Use warm or hot water for normally soiled items. * Reduce the load size to avoid overloading. * For heavily soiled laundry, use the JEAN or Soak (SPEEDY SOAK) & JEAN wash cycle. * Separate heavily soiled items from lightly soiled ones. * Pretreat stains and heavy soil as directed on the product wash instructions.
General| Type | Top Load Washer |
|---|---|
| Capacity | 17 kg |
| Energy Rating | 4 Stars |
| Spin Speed | 700 RPM |
| Steam | Yes |
| Motor Type | Inverter Direct Drive |
| Noise Level (Wash/Spin) | 72dB |
| Dimensions (WxDxH) | 600 x 600 x 850 mm |
Defines WARNING and CAUTION symbols indicating potential risks and consequences of misuse.
Specifies safety requirements for appliance use by persons with reduced capabilities and need for supervision.
Covers safety aspects related to operating, transporting, and installing the washing machine safely.
Outlines safety precautions for operating the appliance, including control panel use and maintenance.
Warns against using flammable substances near the appliance and precautions for water leaks.
Provides safety instructions for cleaning the appliance and its safe disposal.
General requirements for selecting a suitable installation location for the appliance.
Recommendations for selecting a suitable, stable, and flat installation site for the appliance.
Steps to lock and unlock the appliance's control panel to prevent unauthorized changes.
General advice and self-help steps before calling LG Electronics service centre for assistance.
Lists common error codes (dE, dL, dr) with their causes and solutions.
Troubleshooting steps for the IE error related to water supply issues.
Troubleshooting LE I (foreign object), DE (outlet), and UE (unbalance) errors.
Resolving sensor (LE, FE, PE), motor (LE), and clutch (AE) errors.
Addressing the tcl alarm indicating the need for the Tub Clean function.
Troubleshooting the E3 error indicating a problem with the drain motor.
Understanding CL as a function, not an error, and how to manage it.
Identifying causes and solutions for rattling, thumping, and vibrating noises during operation.
Troubleshooting common operational problems like the appliance not powering on or operating.
Resolving issues with water supply, controls, circuit breakers, and low water pressure.
Diagnosing and fixing problems related to detergent not being dispensed correctly.
Identifying and resolving causes of water leakage from the appliance.
Troubleshooting water leakage, filling, and drainage problems.
