LG WT19WSBP User Manual (English)

Other manuals for LG WT19WSBP

Questions and Answers:

K
Karla RobinsonAug 22, 2025
Why is my LG WT19WSBP not operating?
- B
  Brenda PierceAug 22, 2025
  Several factors can prevent your LG washer from operating. First, the control panel might have powered off due to inactivity, which is normal; press the POWER button to turn it on. Ensure the washer is securely plugged into a working outlet. Check that the water supply is turned on fully. Make sure the cycle was set correctly, the door is closed properly, and then press the START/PAUSE button. Also, verify that the circuit breaker/fuse hasn't tripped or blown. If these steps don't work, try resetting the control by pressing the POWER button, reselecting the cycle, and pressing START/PAUSE again. Extremely low water pressure or a washing machine that is too cold can also prevent operation. Note that during certain cycles, the drum may stop temporarily while water is being heated.
M
Marcus HurleyAug 23, 2025
What to do if my LG WT19WSBP is leaking water?
- M
  Mrs. Sarah WallaceAug 23, 2025
  If your LG washer is leaking water, check the supply hose connections at both the tap and the washing machine to ensure they are tight and the hoses aren't cracked or split. Also, inspect the house drain pipes for clogs, especially if water is backing up during the drain cycle; a plumber may be needed to repair clogged drain pipes. Make sure the drain hose is properly installed and secured to prevent it from coming out during draining. Finally, ensure that large items like pillows or blankets aren't above the top of the drum, as this can also cause leaks.
S
Steven CampbellAug 25, 2025
Why is my LG Washer not filling properly?
- J
  Joshua HannaAug 25, 2025
  If your LG washer isn't filling properly, make sure the inlet filters on the fill valves are not clogged. Check that supply hoses are not kinked or clogged. Ensure that both hot and cold water taps are turned on all the way. Verify supply hose connections, because hot and cold supply hoses may be reversed.
J
Joseph MclaughlinAug 26, 2025
What to do if LG WT19WSBP Washer will not drain water?
- C
  Chelsea MarshallAug 27, 2025
  If your LG washer will not drain water, ensure that the drain hose is not kinked. Also, make sure that the drain hose is no higher than 1.2 m above the bottom of the washing machine.
E
Erica JenkinsAug 27, 2025
How to improve soil removal in my LG WT19WSBP Washer?
- S
  Stephen SullivanAug 27, 2025
  To improve soil removal when using your LG Washer: * Use the correct amount of detergent, considering the load size, soil amount, and water hardness. * Use warm or hot water for normally soiled items. * Reduce the load size to avoid overloading. * For heavily soiled laundry, use the JEAN or Soak (SPEEDY SOAK) & JEAN wash cycle. * Separate heavily soiled items from lightly soiled ones. * Pretreat stains and heavy soil as directed on the product wash instructions.
M
Mrs. Jamie OsbornAug 28, 2025
What to do if there's detergent residue on clothes after washing in my LG WT19WSBP Washer?
- E
  Emily MorrisonAug 29, 2025
  If you notice detergent residue on your clothes after washing in your LG Washer, consider the following: * Ensure you are not overloading the washer. * Check if the detergent needs to be pre-dissolved according to its instructions. * Try pre-dissolving the detergent before adding it to the washer. * Increase the water temperature, using hot water if safe for the fabric.
T
Tanya GreeneAug 30, 2025
Why does my LG WT19WSBP vibrate so much?
- E
  emilyburnettAug 30, 2025
  Excessive vibration in your LG washer can be caused by a few things. First, make sure all packaging materials have been removed. An unevenly distributed wash load can also cause vibration; pause the cycle and redistribute the load after the door unlocks. Check that all leveling feet are resting firmly and evenly on the floor; refer to the 'Leveling the Appliance' section for instructions. Finally, ensure the floor is solid and doesn't flex; refer to the 'Installation Place Requirements' section.
M
Michael RamirezAug 31, 2025
How to fix poor stain removal in LG WT19WSBP Washer?
- E
  Evan RichAug 31, 2025
  If your LG washer isn't removing stains effectively, it could be due to improper option selection. For heavier soils and tougher stains, select the Remojo (Soak) feature to boost the cleaning power of the selected cycle. Also, previously washed articles may have stains that have already set, making them difficult to remove. These may require hand washing or pretreating.
K
Kyle OrrSep 1, 2025
What to do if my LG Washer displays a dE DOOR ERROR?
- S
  Scott ConnerSep 2, 2025
  The dE DOOR ERROR on your LG Washer indicates a problem with the door. It may appear because the door is not closed properly or because the door was opened during operation. Ensure the door is completely closed. If the error persists, call for service. If the door was opened during a cycle, press Start/Pause to cancel the error, then press Start/Pause again to restart the wash programme.
J
Jay MartinSep 3, 2025
Why does my LG WT19WSBP Washer show a dL DOOR LOCK ERROR?
- M
  Matthew WatkinsSep 3, 2025
  The dL DOOR LOCK ERROR on your LG Washer typically means the door isn't locking correctly. Check for obstructions like clothing or shipping materials that might be caught under the door. Ensure nothing is preventing the door from closing completely. If the error continues after ensuring the door is clear and fully closed, call for service.

LG WT19WSBP Specifications

General

Brand	LG
Model	WT19WSBP
Category	Washer
Language	English

LG WT19WSBP Service Manual

Table of Contents

Other manuals for LG WT19WSBP

Questions and Answers:

LG WT19WSBP Specifications