LG WT4970CW - Checking and choosing the proper location

12 NSTALLA_T ION _NSTRUCTIONS
Checking and choosing the proper
Install the washing machine on a solid floor that is strong and
rigid enough to support the weight of the washing machine,
even when fully loaded, without flexing or bouncing. If the
floor has too much flex, you may need to reinforce it to make
it more rigid, if the floor is not solid, it may cause severe
vibration and noise.
1 Clean the floor before instaffation.
Make sure to select solid and smooth ground.
2 Two or more people are needed for moving and
unpacking the washing machine.
3 Allow for sufficient space between the walls and the
washing machine for installation.
You must allow sufficient space for water lines, the drain
line, and airflow,
55 314"
(141.7 cm)
(with lid
open}
._,4 _ 1"
(:iO cm)(2.5 crl
27"
_ (6&6 cm} ............
453/8"
(115,3 cm}