What to do if water in my LG WT7100C does not drain?
If the water in your LG washer isn't draining properly or drains too slowly, the drain hose might be kinked, pinched, or clogged. Ensure the drain hose is free from obstructions and isn't pinched behind or under the washer. Also, the drain discharge shouldn't be more than 96 inches (2.4 m) above the bottom of the washer; adjust the hose if necessary.
Why does my LG WT7100C make a thumping sound?
If your LG washer is making a thumping sound, it's normal for heavy wash loads to produce this noise. However, if the sound continues, the washer is likely out of balance. Stop the cycle and redistribute the wash load after the lid unlocks. Alternatively, the wash load itself may be out of balance, so pausing the cycle to redistribute the load can help.
What to do if my LG WT7100C Washer shows IE INLET ERROR?
If your LG washer displays an IE INLET ERROR, it could be due to several reasons related to the water supply. First, ensure that the water supply faucets are fully open. Check the water inlet hoses to make sure they are not kinked, pinched, or crushed. Also, the water supply pressure might be too low; check another faucet in the house to ensure adequate water pressure. Avoid using leak-limiting hoses, as they can falsely trip and prevent the washer from filling.
Why does my LG WT7100C show UE UNBALANCE ERROR?
The UE UNBALANCE ERROR on your LG washer can occur due to several reasons. It may appear if the load is too small; in this case, add additional items to balance the load. This error can also happen when heavy articles are mixed with lighter items; always try to wash items of similar weight to evenly distribute the load. Finally, the load might be out of balance because articles have become tangled. If this occurs, manually redistribute the load.
Why is detergent not dispensing in my LG Washer?
To resolve incomplete or no dispensing of detergent in your LG washer, ensure detergent and additives are placed in the correct dispenser compartments, and the dispenser drawer is fully closed before starting the cycle. Use the amount of detergent suggested per the manufacturer’s recommendations and dilute it with water to the maximum fill line on the compartment to avoid clogging. Also, make sure that both hot and cold water faucets are turned on all the way.
Why my LG WT7100C is not filling properly?
If your LG washer is not filling properly, make sure the inlet filters on the fill valves are not clogged. Also, check that inlet hoses are not kinked or clogged. Ensure that both hot and cold water faucets are turned on all the way. Close the lid (door) and make sure that nothing is caught under the lid (door) preventing it from closing completely.
Why is my LG WT7100C Washer leaking water every load?
If your LG washer is leaking water every load, check all fill and drain hose connections to make sure they are tight and secure.
General| Energy Star Certified | Yes |
|---|---|
| TurboWash Technology | Yes |
| Smart Diagnosis | Yes |
| Number of Wash Cycles | 12 |
| Color | White |
General safety advice and explanation of warning symbols.
Critical safety precautions for installation and general use.
Step-by-step guide to operating the washing machine.
Routine cleaning of the washer's exterior, interior, and tub.
Cleaning dispenser drawer and removing mineral scale.
How to clean filters to ensure proper water filling.
Steps to protect the washer from freezing temperatures.
Proper grounding for electrical safety.
Identification of the washing machine's components.
Information on included and required accessories.
Tools needed and unpacking instructions.
Technical details, dimensions, and site requirements.
Steps for connecting water supply and drain hoses.
How to level the washer and connect to power.
Procedure to run a test cycle to check installation.
Instructions for using detergent, softener, and bleach.
Descriptions of available wash cycles and their uses.
How to select cycles, adjust settings, and use options.
Troubleshooting appliance issues using phone or app.
Checks to perform before contacting service for issues.
Identifying noises and their causes and solutions.
Troubleshooting leaks, excessive sudsing, and power issues.
Addressing long cycle times and detergent dispensing problems.
Diagnosing issues when the washer doesn't start or respond.
Solutions for filling, draining, and bleach dispensing problems.
Addressing common performance issues like wrinkling, staining, and odors.
Explains common error codes and their solutions.
Details of the warranty coverage for products sold in the USA.
Details of the warranty coverage for products sold in Canada.
Explains the arbitration process for warranty claims.
Lists conditions and situations not covered by the warranty.
To Next Page
