29OPERATION
ENGLISH
Control Lock
Use this function to disable the controls. This
function can prevent children from changing
cycles or operating this washer.
• The function does not lock the door.
• Once this function is set, all buttons are locked
except the Power button.
• When the controls are locked,
CL and the
remaining time are alternately shown on the
display during the wash cycle.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
Locking the Control Panel
1 Turn on the power.
2 Press and hold the Extra Rinse button for 3
seconds to activate this function.
Unlocking the Control Panel
1 Turn on the power.
2 Press and hold the Extra Rinse button for 3
seconds to deactivate this function.
• When this function is deactivated, a chime
will sound and the remaining time for the
current cycle will reappear on the display.
Add Garment
If you’ve forgotten to add an item or need to
remove foreign objects like coins or keys after the
cycle has started, the best time to do so is while
the Add Garment indicator is on.
• Once the indicator turns off, adding garments
may affect the cycle time or wash performance.
1 Press the Start/Pause button.
• The cycle pauses and the lid unlocks.
2 Open the lid, add garments or remove foreign
objects, and close the lid.
3 Press the Start/Pause button to resume the
cycle. The cycle continues automatically.
• This washer is equipped with a special drain
feature that is designed to make your washer as
safe as possible. If the washer is paused or shut
off while there is still water in the tub, the water
will drain automatically after several minutes of
inactivity. This helps keep children safe by
reducing the possibility of water remaining in
the tub.
Any water remaining in the tub will automatically
drain 4 minutes after the washer has shut off. If
the washer is paused and the Start/Pause button
is not pressed within 60 minutes, the washer will
shut off and all cycle settings will be lost. Any
water remaining in the tub will be drained.
The washer can be turned on or restarted any
time before the drain begins. However, once the
washer begins to drain, all controls and
functions will be disabled until the water has
been completely drained and the washer shuts
off.
To Next Page
Loading...
Need help?
General
