What does dE mean on my LG WT7880HWA.ABWEUUS Washer?
The dE error on your LG washer indicates an issue with the lid. Make sure the lid is closed properly. If the error persists after closing the lid, it is advised to call for service.
How to fix the UE UNBALANCE ERROR on my LG WT7880HWA.ABWEUUS?
The UE UNBALANCE ERROR on your LG Washer typically means the load is unbalanced. This can happen if the load is too small; in this case, add additional items. It can also occur when heavy articles are mixed with lighter items; try to wash articles of similar weight. If articles have become tangled, manually redistribute the load to allow the washer to rebalance properly.
Why does my LG Washer say UE?
The UE error on your LG washer indicates an unbalanced load. This can happen because the load is too small, heavy items are mixed with lighter ones, or the load is simply out of balance. To fix this, try adding more items if the load is too small, washing similar weight items together, or manually redistributing tangled items within the drum.
What to do if my LG WT7880HWA.ABWEUUS won't turn on?
If your LG washer isn't turning on, first ensure the power cord is securely plugged into a grounded, 3-prong, 120-VAC, 60 Hz outlet. Also, check your house fuse or circuit breaker; reset the breaker or replace the fuse if necessary, without increasing its capacity. If a circuit overload is the issue, consult a qualified electrician.
Why is my LG WT7880HWA.ABWEUUS not draining properly?
If water isn't draining properly from your LG washer, check the drain hose for clogs, kinks, or pinches behind or under the washer. Also, make sure the end of the drain hose isn't more than 96 inches (2.4 m) above the bottom of the washer. If it is, lower it.
How to fix IE inlet error on LG WT7880HWA.ABWEUUS Washer?
The IE error on your LG washer means there's an issue with the water inlet. Ensure the water supply faucets are fully open and that the water inlet hoses aren't kinked, pinched, or crushed. Avoid leak-limiting hoses. If the problem persists, clean the inlet filters.
What does tE mean on my LG WT7880HWA.ABWEUUS Washer?
The tE error on your LG washer indicates a temperature sensor error, possibly due to a control issue. Unplug the washer and wait 60 minutes, then reconnect the power and try again. If the error persists, it is advised to call for service.
How to fix OE water outlet error on LG WT7880HWA.ABWEUUS?
To fix the OE error on your LG washer, ensure the drain hose is free of clogs or kinks and isn't pinched. Also, verify that the end of the drain hose is not more than 96 inches (2.4 m) above the bottom of the washer; if it is, adjust its position.
Why is my LG WT7880HWA.ABWEUUS Washer having excessive suds?
Excessive suds in your LG washer are likely due to using too much detergent or the incorrect type of detergent. Make sure you are only using detergents with the HE (High-Efficiency) logo, as these are formulated with suds-reducing agents.
What does CL mean on my LG WT7880HWA.ABWEUUS Washer display?
The CL on your LG washer display indicates the control lock function is activated, preventing changes to cycles or operation. Turn off the control lock function in the control panel.
General| Type | Front Load Washer |
|---|---|
| Capacity | 5.0 cu. ft. |
| Color | White |
| Energy Star Certified | Yes |
| TurboWash Technology | Yes |
| Smart Diagnosis | Yes |
| Wi-Fi Connectivity | Yes |
| Steam | Yes |
| Smart Technology | Yes |
| Wash Cycles | 12 |
| Voltage | 120V |
Essential guidance to read all safety instructions before operating the appliance.
Critical warnings about potential hazards during appliance use, emphasizing severe injury risks.
Essential tools, proper location selection, power outlet, and flooring guidelines for installation.
Detailed instructions on connecting water inlet hoses and the drain hose correctly.
Guidance on drainage methods and critical steps for leveling the washing machine.
Final adjustments for leveling the washer and connecting it to the power supply.
Explanation of the washing machine's control panel layout and features.
Overview of available wash cycles, descriptions, default settings, and cycle guide.
How to adjust wash temperature, spin speed, soil level, and use special care features.
Initial checks to perform before contacting customer service for assistance.
List of error codes, their possible causes, and recommended solutions.
Resolving issues related to water leaking, excessive sudsing, power, and cycle times.
Details of the limited warranty coverage, terms, and conditions for products purchased in the USA.
Information on arbitration, class action waivers, and procedures for resolving disputes.
Overview of the limited warranty terms and conditions for products purchased in Canada.
Procedures for dispute resolution, including arbitration and governing law for Canada.
To Next Page
