Why is my LG Washer not filling properly?
If your LG washer isn't filling properly, start by checking that both the hot and cold water faucets are fully turned on. Also, inspect the inlet filters on the fill valves to ensure they are not clogged and check the inlet hoses for any kinks or obstructions. Keep in mind that this is a High-Efficiency (HE) washer, so the water level settings may differ from conventional washers.
What to do if my LG WT7880HWA.ABWEUUS Washer is leaking water?
If your LG washer is leaking water, check the hoses and connectors for leaks, cracks, and splits, and tighten any loose connections. Also, check for clogs in the house drain pipes and ensure the drain hose is properly installed and secured to prevent it from coming out during the drain cycle. Avoid washing more than half a load of items that float, such as pillows, and reduce the amount of detergent used, especially if the load is small or the water is soft.
How to fix IE inlet error on LG WT7880HWA.ABWEUUS Washer?
The IE error on your LG washer means there's an issue with the water inlet. Ensure the water supply faucets are fully open and that the water inlet hoses aren't kinked, pinched, or crushed. Avoid leak-limiting hoses. If the problem persists, clean the inlet filters.
Why is my LG WT7880HWA.ABWEUUS not draining properly?
If water isn't draining properly from your LG washer, check the drain hose for clogs, kinks, or pinches behind or under the washer. Also, make sure the end of the drain hose isn't more than 96 inches (2.4 m) above the bottom of the washer. If it is, lower it.
What to do if my LG WT7880HWA.ABWEUUS won't turn on?
If your LG washer isn't turning on, first ensure the power cord is securely plugged into a grounded, 3-prong, 120-VAC, 60 Hz outlet. Also, check your house fuse or circuit breaker; reset the breaker or replace the fuse if necessary, without increasing its capacity. If a circuit overload is the issue, consult a qualified electrician.
Why does my LG Washer say UE?
The UE error on your LG washer indicates an unbalanced load. This can happen because the load is too small, heavy items are mixed with lighter ones, or the load is simply out of balance. To fix this, try adding more items if the load is too small, washing similar weight items together, or manually redistributing tangled items within the drum.
How to fix the UE UNBALANCE ERROR on my LG WT7880HWA.ABWEUUS?
The UE UNBALANCE ERROR on your LG Washer typically means the load is unbalanced. This can happen if the load is too small; in this case, add additional items. It can also occur when heavy articles are mixed with lighter items; try to wash articles of similar weight. If articles have become tangled, manually redistribute the load to allow the washer to rebalance properly.
General| Type | Front Load Washer |
|---|---|
| Capacity | 5.0 cu. ft. |
| Color | White |
| Energy Star Certified | Yes |
| TurboWash Technology | Yes |
| Smart Diagnosis | Yes |
| Wi-Fi Connectivity | Yes |
| Steam | Yes |
| Smart Technology | Yes |
| Wash Cycles | 12 |
| Voltage | 120V |
Essential guidance to read all safety instructions before operating the appliance.
Critical warnings about potential hazards during appliance use, emphasizing severe injury risks.
Essential tools, proper location selection, power outlet, and flooring guidelines for installation.
Detailed instructions on connecting water inlet hoses and the drain hose correctly.
Guidance on drainage methods and critical steps for leveling the washing machine.
Final adjustments for leveling the washer and connecting it to the power supply.
Explanation of the washing machine's control panel layout and features.
Overview of available wash cycles, descriptions, default settings, and cycle guide.
How to adjust wash temperature, spin speed, soil level, and use special care features.
Initial checks to perform before contacting customer service for assistance.
List of error codes, their possible causes, and recommended solutions.
Resolving issues related to water leaking, excessive sudsing, power, and cycle times.
Details of the limited warranty coverage, terms, and conditions for products purchased in the USA.
Information on arbitration, class action waivers, and procedures for resolving disputes.
Overview of the limited warranty terms and conditions for products purchased in Canada.
Procedures for dispute resolution, including arbitration and governing law for Canada.
To Next Page
