Why my LG WT901CW will not turn on?
If your LG Washer won't turn on, first ensure the power cord is properly plugged into a grounded, 3-prong outlet. Check your house fuse or circuit breaker and reset it or replace the fuse if necessary. If a circuit overload is the issue, have it corrected by a qualified electrician.
Why is my LG WT901CW filling with water slowly?
If your LG Washer is filling slowly or not at all, ensure the water supply faucets are fully open and the water line hoses aren't kinked, pinched, or crushed. Clean the inlet filters, as described in the Care and Cleaning section. Check your household water pressure by testing another faucet. If the pressure is low, contact a plumber to repair the water lines. Also, avoid using leak-limiting hoses, as they can falsely trip and prevent filling.
How to fix an LG WT901CW that will not turn on?
If your LG Washer won't turn on, verify that the power cord is securely plugged into a grounded, 3-prong, 120-VAC, 60-Hz outlet. Also, check your house fuse or circuit breaker and reset or replace it if necessary. If a circuit overload is the issue, have it corrected by a qualified electrician.
How to fix slow draining in my LG Washer?
If your LG Washer drains slowly or not at all, make sure the drain hose is free of clogs, kinks, etc., and is not pinched. Adjust or repair the drain hose if needed. The maximum drain height should be 96 inches (8 ft.).
What to do if my LG WT901CW shows an error after an unsuccessful rebalance attempt?
If your LG Washer displays an error after an unsuccessful rebalance attempt, it means the automatic attempt to rebalance the load was not successful and the cycle has been paused to allow the load to be manually adjusted. Small loads may need additional items to be added to allow the washer to balance the loads. The load may have heavy items loaded with lighter items. Always try to wash articles of somewhat similar weight to allow the washer to evenly distribute the weight of the load for spinning. Manually redistribute the load if articles have become tangled preventing the automatic distribution from working properly.
What to do if my LG WT901CW displays an error because the lid is not closed properly?
If your LG Washer displays an error because the lid is not closed properly, make sure that the lid is closed properly and press the START/PAUSE button. After starting a cycle, it may take a few moments before the tub begins to turn or spin. The washer will not spin unless the lid is closed. Make sure the fold-down lid is in the extended position so the door sensor will operate properly. If the lid is closed and the error message is displayed, call for service.
What to do if my LG WT901CW fills slowly?
General| Style | top load |
|---|---|
| Color | white, smooth white |
| Washer Capacity | 3.3 cubic feet |
| Max Spin Speed | 700 revolutions per minute |
| Spin Speeds | 3 |
| Number of Cycles | 8 |
| Cycle Selections | rinse + spin, spin only, cotton/normal, tub clean, bulky/bedding, heavy duty, speed wash, delicates |
| Options | extra rinse, fabric softener, delay wash, child lock, signal, water plus |
| Temperature Settings | 3 |
| Temperature Selections | hot, warm, cold |
| Soil Levels | light, normal, heavy |
| Control Panel | electronic |
| Delay Start / End | yes |
| Child Lock | yes |
| Cycle Signal | yes |
| Annual Energy Consumption | 80 kilowatt hours |
| Voltage | 120 volts |
| Current | 5 amperes |
Weight and Dimensions| Depth | 26.4 inches |
|---|
Essential safety rules for general use and operation to prevent hazards.
Guidelines for proper electrical grounding of the appliance to prevent shock.
Crucial safety measures to follow during the installation process.
Safety guidelines for operating, maintaining, and disposing of the washer.
Explains the diagnostic feature for remote technical issue analysis.
A step-by-step visual guide to the entire installation process.
Guidance on selecting a suitable and stable installation site.
Requirements and considerations for the electrical power outlet.
Recommendations for floor type and stability to minimize vibration.
Instructions for safely removing packaging and shipping restraints.
Steps for connecting hot and cold water supply hoses to the washer.
Instructions for correctly attaching and securing the drain hose.
Procedures for adjusting leveling feet to ensure stability and proper operation.
Guidance on plugging the washer into a suitable electrical outlet.
Steps to perform a test run after installation to verify functionality.
A chart detailing cycles, fabric types, and available options.
How to interpret and resolve error codes displayed on the washer.
Steps to take before contacting customer support to resolve common issues.
Instructions on how to use the remote diagnostic feature for troubleshooting.
To Next Page
