LG WTG1434 HF Series - Winterization and Freezing Prevention

34
Cover,Lower
Damper,Friction
2) Disassembly of Back Panel, Power
Cord, Inlet Valve & BP Sensor
① 
back side.
② Disassemble the back panel.
③ Disconnect two connectors and disassemble
the power cord.
④ 
leads form the inlet valve.
⑤ Remove the inlet valve.
⑥ 
the BP sensor.
⑦ Remove the BP sensor.
3) Disassembly of Lid/Top Cover
Assebmly
① Use a sharp tool to disassemble the lower
cover.
②
screw, disassemble the lid assembly.
③ By loosening the two screws on the rear side of
the Top Cover, disassemble the Top Cover.