39
① Remove screw cap on the Front Panel, Remove
screw and then open the Front Panel.
② After gently pulling the right Rib, Holding Connection
Housing of the Wi-Fi module and then pull it out.
(There is a risk of damage to the rib, so pull it with
less force.)
Hook
Rib
Shield can
③ If you want assemble part after replacing the
module, First , Insert module in the left hook,
Second, Pull the rib in right side and then assemble
it.
CAUTION
Please press the green area when assembling part.
④ Assemble Connector to Housing, and reassemble
the front panel.
8) Replacement of Wi-Fi Module
▶
for more than 3 seconds or If you suspect other Wi-Fi issues, Please check below
Display contents Expected cause Action
Not Connected
Modem
The product display and Wi-Fi module can not be
connected.
-.Reconnect the connector
Wi-Fi communication
failure
The product display and Wi-Fi module are con-
nected and communicating. but the Wi-Fi module
malfunction.
-.Change the Wi-Fi module
To Next Page
Loading...
