53
12) Power is automatically turned off during operation or immediately turning on
the power button.
Where, what & how to chec k?
Result of Check
Possible Cause
How to repair & settle
Auto Power Relay or Controller
1. Check whether power is automatically
Mains voltage
1. It is mostly caused by noise from mains
or transient power cut.
Power Failure
1. Check whether power failure occurred
for a certain period of time in
circumstance.
Model : T1282WFDSD
turned off when turning on the power
switch after unplugging the power cord
from the outlet.
2. It would be defect of the controller if
power is automatically tumed off
immediately when turning on
the power
switch even though there is no defects
in the power switch.
Automatically tumed
off
Mechanical defect of the
Defect in mains Explain the cause
(It happens specially when a
high frequency equipment is
a used around the washer or
in the case voltage fluctuation
is big.)
Feature of product
Explain
the function about
Auto Restart.
(This model is adjusted Auto
Restart.
This function is that machine
can automatically process
cycle before occurred power
failure when power failure
happens.)
power switch
Change the switch.
Change the controller.
To Next Page
Loading...
