22
EN
Control Panel
For Non-Steam Models
POWER Button
• Press the POWER button to turn the
washing machine on, or off if washing
hasn't commenced.
• The power goes off automatically about 30
seconds after the wash is finished.
START/PAUSE Button
• Press the START/PAUSE button to start
the wash cycle or pause the wash cycle.
• If a temporary stop of the wash cycle is
needed, press the START/PAUSE button.
NOTE
• If the wash is not recommenced within 5
minutes when in pause, then the
appliance will automatically turn off.
• For customer safety, the door will be
locked automatically during operation. If
there are additional laundry to put in,
press START/PAUSE to unlock.
• Press START/PAUSE button again to
resume operation.
1
2
Program Button
• Programmes are available according to
laundry type.
• Lamp will light up to indicate the selected
programme.
Option Button
• Press buttons to select the desired
options.
Display
• The display shows the settings, estimated
time remaining, options, and status
messages. When the washer is turned on,
the default settings in the display will
illuminate.
• The process lamp will remain prior to it
beginning. The process lamp will blink
during that process, and the lamp will then
turn off when that process has completed.
3
4
To Next Page
Loading...
