LGMG North America Inc. Operation and Safety Manual
3
1.1Danger
Failure to disobey the instructions and safety
rules in this manual may cause death or serious
injuries.
1.2 No Operation Except
Following Cases
You have understood and practiced the rules for
safe operation of the vehicle in this manual.
1) Avoid dangerous situations. Know and
understand the safety rules before
proceeding with the next step.
2) Always perform a pre-operation inspection.
3) Always perform a pre-use functional test.
4) Check the workplace.
5) Use the vehicle only for its intended
purpose.
6) Read, understand, and follow the
manufacturer's instructions and safety rules
- safe operation manuals and vehicle
labels.
7) Read, understand and follow user safety
rules and work site regulations.
8) Read, understand and follow all applicable
government laws and regulations.
9) You have received the training on safe
operation of the vehicle.
1.3 Classification of Hazards
△
! NOTICE
Classification of hazards
The meanings of symbols, color codes
and characters of LGMG North
America’s products are as follows:
Security warning symbol: Are used for
warning of potential personal injuries.
Observe all safety instructions below
these signs, to avoid situations
causing potential personal injury and
death.
Red: Signifies dangerous situations. If
not avoided, will result in personal
death or severe injury.
Orange: Signifies dangerous
situations. If not avoided, may result in
personal death or severe injury.
Yellow: Signifies dangerous situations.
If not avoided, may result in minor or
intermediate personal injury.
Blue: Signifies dangerous situations. If
not avoided, property loss or damage
can occur.
1.4 Intended Purpose
The use of the machine is only limited to lift staff,
tools and materials to the high work place.
△
! CAUTION: It is forbidden to carry
loads.
1.5 Safety Sign Maintenance
1) The operators should always keep in mind
their safety when replacing any missing or
damaged safety signs.
2) The safety decal should be cleaned with
mild soap and water.
3) Do not use solvent-based cleaners as they
To Next Page
Loading...
Need help?
General
