To Next PageTo Next Page
Need help?Do you have a question about the LGMG SR1018D and is the answer not in the manual?
General| Platform Capacity | 230 kg |
|---|---|
| Drive Type | Electric |
| Gradeability | 25% |
| Maximum Working Load | 230 kg |
| Max Platform Capacity | 230 kg |
Failure to follow safety rules can lead to death or serious injury.
Lists conditions for safe operation: inspect, test, check workplace, intended use.
Explains hazard symbols, color codes, and characters for warnings.
Machine is limited to lifting staff, tools, and materials to high work places.
Operators must maintain safety signs, keep them clean, and not use solvent cleaners.
Machine is not insulated; maintain safe distance from power lines.
Platform must be raised on solid, flat ground; speed limits & wind considerations.
Avoid placing body parts in hazardous areas, especially near scissors or pinch points.
Do not drive on slopes exceeding rated limits; drive carefully on uneven terrain.
Use safety harnesses, do not sit on guardrails, keep platform clear.
Be aware of obstacles, blind spots, and overhead barriers.
Do not use incorrect battery/charger, avoid magnetic fields, inspect for damage.
Avoid hazardous places, flammable substances, and refueling near ignition sources.
Do not use damaged machines, perform checks, follow maintenance, keep manuals.
Avoid hydraulic leaks, ensure ventilation, be aware of internal component hazards.
Handle batteries with care, wear protective gear, avoid sparks and open flames.
Lower outriggers on firm ground, ensure machine is level before raising platform.
Details operation of the ground control panel for starting, lifting, and emergency functions.
Describes the Platform Control Unit (PCU) with its various buttons and functions.
Outlines general operating principles and specific procedures for ground and platform control.
Lists essential conditions before operating the machine.
Operator's responsibility for checks and routine maintenance.
Detailed checklist of components and areas to inspect before use.
Reiterates conditions for safe operation, including workplace checks.
Emphasizes operator's role in workplace safety assessment.
Identifies common hazardous situations to avoid in the work area.
Reiterates conditions for operation, including functional testing.
Explains the purpose of functional tests and operator responsibilities.
General guidance on performing functional tests.
Specific steps and expected results for testing ground controls.
Procedures for testing controls from the platform.
Method for testing the tilt sensor functionality.
Tests for limit switches and outrigger operation.
Rules for lifting and transporting the machine safely.
Steps to properly secure the machine for transport.
General safety checks for transportation.
Specific instructions for safely lifting the machine.
