LGMG North America Inc. Operation and Safety Manual
85
switch is released or the control handle
is returned to the neutral position,.
3) Steering
Press the driving function button. Press the
enable button on Platform Control Station and
the thumb rocker switch to the left or right, the
vehicle will turn to the left or right. Release the
enabling switch or the steering switch to stop
steering.
4) Lifting and Lowering
Turn the key switch to the upper control mode,
start the engine, press the button with lift
function, press the enable button and move the
control handle. The platform will lift when the
control handle move to the backward; and the
platform will lower when the control handle
move to the forward.
5) Outriggers
Turn the key switch to the upper control mode,
start the engine, press and hold one of the four
outrigger function enable buttons, press the
enable switch and move the control handle. The
outrigger will extend and retract depending
upon the direction the button was pushed. After
the outrigger is firmly set, the indicator on the
button will be on.
6) Automatic Leveling
When the machine is tilted, it is necessary to
use outriggers to level the vehicle. The control
system allows automatic leveling using the
outriggers. Turn the key switch to the upper
control mode, start the engine, press and hold
the automatic leveling button, press the enable
switch and move the control handle in the
direction of yellow arrow or blue arrow, the
outrigger will extend or retract. After leveling,
the four lamps on outrigger button will be on;
push the switch, there will be an alarm. At this
moment, the outrigger cannot extend, indicating
that the vehicle is in leveling mode.
To Next Page
Loading...
Need help?
General
