LIBHOF Q-18 - Cooling Device Working Mode Setting

To Next Page

To Previous Page

English

4.5 Cooling device working mode setting

Cooling device working mode selection.

There are two working modes in the device:

• HH working mode: the cooling device will work normally in this mode. The LED light

«on» will be red in this working mode.

• ECO working mode: the cooling device working will be energy saving. The LED light

«on» will be green in this working mode.

• Touch the button «set» twice continually , there will be flashing letter «HH» or «ECO»

display in the screen, use the button «UP +» and «DOWN -» to select the mode you

what. The working mode letter «HH» or «ECO» will flash in the screen for a few

seconds, and then the display screen will return to display the current temperature.