LIBHOF Q-18 - Using the Fused DC Plug for Device Connection; Connect to an AC Power Supply

16
English
5.1 Using the fused DC plug for device connection
NOTICE! Danger of damage!
For protection of the device, the DC cable supplied includes a fuse inside the plug.
Do not remove the fuse from the DC plug. Only use the DC cable supplied.
• Plug the DC cable into the cooling device DC power supply inlet.
• Connect the DC cable to the DC power supply outlet.
5.2 Connect to an AC power supply
• Plug the DC cable into the cooling device DC power supply inlet.
• Connect the DC cable to the cigar lighter socket of an AC adaptor (AC adaptor is
optional sale products).
• Connect the AC cable of the AC adaptor to the AC power supply outlet.
NOTICE! Danger of damage!
• Only use the AC adaptor supplied from the manufacture.
• Never handle plugs and switches with wet hands or if you are standing on a wet
surface.
• If you are operating your cooler on board of a boat from a power supply 120V,
you must install a residual current circuit breaker between the 120V AC power
supply and the cooler. seek advice from a trained technician.