LIBRATONE ZIPP - iOS Device Speaker Configuration; Configure Speaker and Home Network

COVER CHANGE
Gone are black speaker boxes! Libratone Zipp comes in all colors of the rainbow. Can’t decide
on a color? Don’t worry! The wool covers are sold separately and can be changed instantly.
When changing the speaker cover on Libratone Zipp: “Gentle is the name of the game”.
• Place the speaker on your lap and unzip the cover.
• Turn the handle upwards.
• Gently pull down the cover around the connector panel towards the speaker bottom.
• Gently unhook the cover from the bottom of the connector panel.
• Loosen the cover from the top of the connector panel.
• Remove the wool cover from the speaker by leading the handle through the hole.
To dress the speaker again, follow the above steps backwards.
TROUBLESHOOTING
Our hearts and souls are in your Libratone Zipp. However, if it’s acting up and you can’t
find your answer here, please visit our support page at:
www.libratone.com/support
REGISTER
To help us give you the best service possible, we encourage you to register your product at:
www.libratone.com/register
WARRANTY
Don’t worry. Your Libratone Zipp is covered by our warranty. Since the warranty follows national
laws, it diers from country to country. For warranty information regarding your country please visit:
www.libratone.com/warranty
Warranty information is occasionally printed on your invoice as well.
32 33