Technical Data
4--8
Liebert HPC--- S 006--- 022--- PD--- 273571--- 01.03.2012
Ta b . 4 h --- Te c h n i c a l D a t a --- F G 0 0 0 6 --- 0 1 8 --- E C 8 0 0
FG0 model with EC 800 mm fans - R410A 006 007 009 011 014 015 018
Performance
(1)
Cooling capacity kW 57.4 78.2 88.3 109.9 140.3 154.0 172.1
Freecooling capacity
(2)
kW 33.9 55.3 65.0 66.5 99.7 103.1 100.9
Compressors power input kW 18.6 20.6 25.0 35.3 41.2 48.9 57.0
Total power input kW 19.3 22.0 26.4 36.7 43.3 51.0 59.1
Unit EER - 2.97 3.55 3.34 3.00 3.24 3.02 2.91
Fluid flow m
3
/h 10.82 14.72 16.64 20.73 26.44 29.05 32.49
Hydraulic pressure drop kPa 118 109 90 109 118 139 143
Sound level
SPL (Sound Pressure Level)
(3)
dB(A) 58 59 61 62
PWL (Sound Power Level)
(4)
dB(A) 75 77 79 81
Refrigeration circuits
Number of refrigeration circuits No 1
Refrigerant charge (each circuit) kg 10.5 12.5 16.0 18.0 26.5 26.5 27.5
Compressors
Number of compressors No
1+1
Type - hermetic scroll
Nominal power (each compressor) HP
10+10
13+13 15+15 15+25 25+25 25+30 30+30
Fans
Number of fans No 1 2 3
Type - axial with EC motor
Wheel nominal diameter mm 800
RPM 1/min 715
Nominal power input (each fan) kW 0.7
Fans power input kW 0.7 1.4 2.1
Air flow rate m
3
/h 13500 28000 27000 40500
Evaporator
Number of evaporators No 1
Type - brazed plate heat exchanger
Internal volume (refrigerant side) l 4.1 5.1 5.6 7.6 9.2 9.2 11.6
Condensing coil
Material tubes / Fins - copper / aluminium
Rows / Fins space No/mm 3 / 1.6 2/1.8 3/1.8 3/1.6 3/1.8 3/1.8 3/1.6
Face area m
2
3.00 6.00 9.00
Internal volume (each coil) l 7.3 9.8 14.7 22.0
Freecooling coil
Material tubes / Fins - copper / aluminium
Rows / Fins space No/mm 3 / 2.5 2/2.1 3/2.1 3/2.5 3/2.1 3/2.1 3/2.5
Face area m
2
3.00 6.00 9.00
Hydraulic connections
Diameters inlet / outlet DN-inch DN50 2" DN65 2 1/2"
Unit volume l 77 101 117 121 159 159 160
Dimensions
Length mm 2043 3043 4043
Depth mm 1201
Height mm 1874
Weights
Net weight kg 861 1055 1147 1266 1643 1661 1702
Operating weight kg 938 1156 1264 1387 1802 1820 1862
Notes:
(1) --- At the following standard conditions: power supply 400V/3Ph/50Hz; outdoo r temperature 35
°
C; water inlet/outlet temperature 15/10
°
C; ethylene glycol 30%.
(2) --- At the following standard conditions: power supply 400V/3Ph/50Hz; outdoo r temperature 5
°
C; fluid inlet temperature 15
°
C; ethylene glycol 30%.
(3) --- Measured with outdoor temperature 35
°
C; 1m from the uni t; free field conditions; according to ISO 3744.
(4) --- With outdoor temperature 35
°
C; calculated according to ISO 3744.
To Next Page
Loading...
