INSTALLATION
4
8
4.1 LOCATION
WARNING
NOTE
1.Place the unit on a firm, level surface in an area with at least 30cm of free space around it
to allow for proper air circulation.
2.Never install the unit where it could be subject to：
Heat sources such as radiators, heat registers, stoves or other products that products that
produce heat.
In an area where oil or water may be splashed
Direct sunlight
Mechanical vibration or shock
Excessive dust
Lack of ventilation, such as cabinet or bookcase
Uneven surface
Install the unit in rooms which exceed 4 m².
Do not install the unit in a place where inflammable gas may leak.
The manufacture may provide other suitable example or may provide additional information
about the refrigerant odour.
To Next Page
Loading...