20 SitnStand
Sitting Down
To sit down – inate the cushion using the controller to 1,2,3 or 4
layers (whichever is most comfortable for you), then sit down on the
pillow facing forward.
When you feel steady, start deating the cushion by pressing on the
Down Arrow button on the controller.
Standing Up
To stand up – First, disconnect your upper-back from the back of the
chair by bending slightly forward, and only then, start inating the
cushion one layer at a time by pressing the Up-Arrow button on the
controller.
The SitnStand Compact has 4 layers: however, Ination can be ended
at any time when the level of elevation is sufcient.
Do not attempt to stand up before the layer is totally inated and there
is no sound from the air pump.
The SitnStand Compact may remain inated until the next time it is
used for sitting down.
To Next Page