Why are heart rate readings abnormally elevated on my Life Fitness M051-00K39-A194?
If the heart rate reading on your Life Fitness Exercise Bike is abnormally elevated, it might be due to electromagnetic interference from devices like TVs, cell phones, computers, cars, or high-voltage power lines. Try moving the bike or the interfering device a few inches away until the readings become accurate.
What to do if heart rate reading is lost on Life Fitness Exercise Bike?
If the heart rate reading on your Life Fitness Exercise Bike is initially detected but then lost, it may be due to external noise interference from personal electronic devices like cell phones and portable MP3 players, or from other equipment such as audio/video equipment, fans, two-way radios, and high voltage/high current power lines. Try removing the source of the noise or repositioning the exercise equipment.
How to fix erratic heart rate reading on Life Fitness M051-00K39-A194 Exercise Bike?
If the heart rate reading on your Life Fitness Exercise Bike is erratic or absent, ensure the belt transmitter electrodes are sufficiently wet, laying flat against the skin, and clean. The chest strap transmitter should be within 3 feet (1 meter) of the heart rate receiver. If the Polar telemetry heart rate chest strap did not lock in with the heart rate receiver, make sure the Polar telemetry heart rate chest strap is installed and move closer to the heart rate receiver. Wait up to 10 seconds for the heart rate to display on the console. Contact Life Fitness Customer Support Services for instructions on how to have the Polar telemetry heart rate chest strap replaced if the battery is depleted.
General| Product Name | Life Fitness M051-00K39-A194 |
|---|---|
| Category | Exercise Bike |
| Type | Upright Bike |
| Resistance Type | Magnetic |
| Resistance Levels | 20 |
| Drive System | Belt Drive |
| Heart Rate Monitoring | Telemetry Compatible |
To Next Page