Life Fitness X1 User Manual (English)

Other manuals for Life Fitness X1

Owner's Manual23 pages

Assembly Instructions2 pages

Questions and Answers:

J
jordanjessicaJul 28, 2025
Why is the wireless heart rate not working on my Life Fitness X1?
- D
  Daniel WhitneyJul 29, 2025
  The wireless heart rate on your Life Fitness Elliptical Trainer might not be working due to several reasons: 1. The wireless heart rate might be turned OFF in the Settings Menu. Check the Settings Menu and ensure that WIRELESS HR is turned ON. 2. There may be poor contact between the telemetry heart rate strap and your skin. 3. Electrical interference from appliances like fluorescent lights or kitchen appliances could be interfering with the telemetry heart rate strap. Try moving the Elliptical Trainer to a different location or move electrical appliances away from it. 4. The battery in the Heart Rate Telemetry Strap might need replacing. The battery type is a CR2032 (3V).
M
Melissa LawsonAug 1, 2025
What to do if my Life Fitness X1 has no power?
- E
  Emily HarperAug 1, 2025
  If your Life Fitness Elliptical Trainer has no power: * Check that the power cord is fully plugged into both the back of the Elliptical Trainer and the wall. * Ensure the power cord is correctly seated in the back of the unit. * If the console does not turn on, press the “Energy Saver” button, as the unit may be in “Energy Saver Mode”. * Verify that all customer assembly connections are working properly by unplugging and re-plugging each connection. Also, check for any cables pinched during assembly.
V
Vincent PerezAug 6, 2025
Why is the start-up resistance so difficult on my Life Fitness Elliptical Trainer?
- B
  Barbara HerringAug 6, 2025
  If the start-up resistance on your Life Fitness Elliptical Trainer seems very difficult, it might be in ‘Safety Mode’. Refer to the console manual on how to turn off this setting. Alternatively, try turning the unit off and then on again.
M
Melissa CarterAug 10, 2025
What to do if total body arms feel loose on Life Fitness X1 Elliptical Trainer?
- L
  Leah TaylorAug 10, 2025
  If the total body arms on your Life Fitness Elliptical Trainer feel loose, remove the moving arm pivot covers and check that the bolt holding the total body arm in place is fully tightened. If they still feel loose, disassemble the total body arms and ensure all the correct hardware from the assembly instructions was used.
M
Megan RhodesAug 14, 2025
Why can't I feel a resistance change at the beginning levels on my Life Fitness X1 Elliptical Trainer?
- A
  Amy PalmerAug 14, 2025
  The resistance curve of the Life Fitness Elliptical Trainer is designed so that you can feel a greater difference in resistance at higher levels.
M
Michael CruzAug 19, 2025
Why do I hear noise as speed increases on my Life Fitness Elliptical Trainer?
- E
  Eric CoxAug 19, 2025
  It is normal for any mechanical device, including your Life Fitness Elliptical Trainer, to become louder as speed increases.
J
Joseph GarzaAug 25, 2025
Why is there noise coming from the pedals of my Life Fitness X1?
- H
  hernandezrobertAug 25, 2025
  Some noise from the pedals of the Life Fitness Elliptical Trainer is normal and can vary depending on the user's weight. Check the assembly hardware beneath the pedal to ensure it is tight.

Life Fitness X1 Specifications

General

Stride Length	20 inches
Resistance Levels	20
Dimensions	76.5"L x 30"W x 66"H (195 cm x 76 cm x 168 cm)
Weight Capacity	350 lbs
Display	LCD
Maximum User Weight	350 lbs
Product Weight	205 lbs
Heart Rate Monitoring	Contact and telemetry