Need help?Do you have a question about the Life Gear 97630 and is the answer not in the manual?
General| Speed | 0.5 - 10 mph |
|---|---|
| Weight Capacity | 250 lbs |
| Speed Range | 0.5 - 10 mph |
| Display | LCD |
| Incline Type | Manual |
Connect Sensor Cable III and II to Stabilizer, attach Handlebar Supports with bolts and washers.
Connect Sensor Cable II to I, attach Handlebar to supports with bolts, washers, and caps.
Connect button wires and sensor cables to Computer, attach Computer with knobs, install Safety Tether Key.
Lift the deck until the Spring Knob locks into position. Ensure it is secure before moving.
Hold the deck, pull the Spring Knob, and lower the deck until it locks into position.
Initiate workout by powering on, attaching Safety Tether Key, and standing on side rails.
Details on START/STOP, PAUSE/ENTER, MODE, PROGRAM, FAST, SLOW, INCLINE UP/DOWN buttons.
Details on Body Fat Program and Program Mode training options.
Instructions for cleaning the treadmill with a soft cloth and storing it properly.
Solutions for common problems like the treadmill not starting or the belt slipping.
How to adjust the running belt tension and alignment for optimal performance.
Guidance on applying silicone oil for treadmill belt maintenance.
To Next Page
