What to do if LifeFitness Treadmill striding belt slips?
If the striding belt on your LifeFitness Treadmill slips during footfall, it may be due to the belt slipping on the front roller during the stall test. To fix this, check the striding belt and re-tension it as necessary.
What to do if LifeFitness Treadmill is making knocking sound coming from deck?
If your LifeFitness Treadmill is making a knocking sound coming from the deck, it may be due to life springs not positioned correctly or loose mounting hardware. To resolve this, reposition or tighten the life springs.
Why is my LifeFitness Treadmill maximum speed reduced?
A reduction in maximum speed on your LifeFitness Treadmill can occur due to several reasons. The user might be pushing the striding belt, in which case, instruct them not to do so in either direction. It could also be due to a wax system malfunction; inspect the spray pattern between 8" (200mm) and 16" (400mm), and if it's not correct, verify the wax nozzle is clean, the hoses are not kinked, the wax bag isn't empty, or the wax is not contaminated. Another cause may be a striding belt/deck malfunction, such as the deck laminate wearing through or the underside of the striding belt becoming glazed; in this case, replace both the belt and deck. Finally, an insufficient power source can cause this issue, so ensure the treadmill is plugged into a dedicated 20amp circuit.
What to do if I hear rubbing sound from underneath LifeFitness Treadmill?
If you hear a rubbing sound from underneath your LifeFitness Treadmill, it could be due to a couple of things. First, inspect underneath the striding belt and the machine for any foreign objects that may be stuck there, and remove any debris or objects that may be causing interference. Second, check the tinsel and reposition it on the outside of the striding belt if it's installed incorrectly.
General| Brand | LifeFitness |
|---|---|
| Model | 9100 |
| Category | Treadmill |
| Language | English |
Provides an overview of the service manual and its structure.
Details on contacting Life Fitness customer support for service needs.
Troubleshooting steps for striding belt slipping or tracking problems.
Solutions for display not illuminating or keys not responding.
Diagnosing and resolving random resets or pauses during operation.
Troubleshooting steps for units that do not power on.
Identifying and fixing issues related to wax system leaks.
Explanation of display console layout and controls for different models.
Steps to enter diagnostic modes and navigate through menus.
Testing the drive motor and controller in automatic and manual speed modes.
Testing the lift motor and switches in automatic and manual incline modes.
Accessing and reviewing logged system errors for troubleshooting.
Procedures for logging maintenance and repair actions.
Adjusting system settings like language, speed limits, and timers.
Step-by-step guide for replacing the striding belt and deck assembly.
Procedure for centering and adjusting the striding belt for proper tracking.
Instructions for removing and installing the main drive motor.
Detailed steps for replacing the incline lift motor.
Procedure for replacing the motor controller PCB.
Guide for replacing the main display board PCB.
Instructions for cleaning the wax system nozzle for proper wax application.
Detailed description and pin functions of the display console PCB.
Description of the motor controller PCB, including LEDs, test points, and connectors.
Description of the Wax Lift PCB, its functions, and connectors.
Visual representation of the treadmill's electrical system connections.
Location of model and serial number for identification and ordering.
Exploded view and part numbers for the Life Fitness 9100 treadmill.
Exploded view and part numbers for the Life Fitness 9500HR treadmill.
Exploded view and part numbers for the Life Fitness 9700HR treadmill.
Schedule and guidelines for regular maintenance to ensure longevity.
Steps for safely unpacking the treadmill from its shipping container.
Important safety instructions and steps for setting up the treadmill.
Information on using fax for parts orders and product troubleshooting.
To Next Page
