Need help?Do you have a question about the LifeGear 97295 and is the answer not in the manual?
Connect Sensor Cable I and II, attach handrails to base frame with bolts and washers.
Connect Sensor Cable II and III, attach handlebar to handrails with adorners and bolts.
Attach computer bracket to handlebar using carriage bolts, spring washers, and cap nuts.
Connect computer to bracket using bolts, and install safety tether key.
Instructions for starting the treadmill and basic operation.
Lists common problems, potential causes, and corrections.
How to adjust the running belt if it shifts or slips.
To Next Page
General
