PARTS OF THE DYNAMINI
Massage
Attachment
(1 of 4)
Battery/Handle
USB-C Charging Port
SoarFX Collection 9 8 DynaMini User Manual Lifepro
FULLY CHARGE THE BATTERY
• Ensure the DynaMini is OFF before
charging.
• Charge the battery fully (for up to
3 hours) before using your DynaMini
for the first time.
• Connect the USB-C charging cable
to the charging port on the top
of the unit.
• Plug the USB-C charging cable into
a USB power adapter, such as a
5V 1A or 5V 2A phone charger.
• Plug the USB power adapter into a
wall outlet.
INSERT A MASSAGE ATTACHMENT
• Make sure the DynaMini is fully charged
and powered OFF.
• Select the desired massage
attachment.
• Insert the stem of the massage
attachment into the nozzle of the unit.
NOTE: Make sure the red line on
the attachment is lined up with the
corresponding red line on the nozzle.
• Press the massage attachment in
firmly to secure it.
• See MASSAGE ATTACHMENT & SPEED
OPTIONS on page 12.
EASY-START SETUP GUIDE
2
1
Non-Slip Wrist Strap
Status Indicator LEDs
The 4 LEDs indicate the
vibration speed selected (1-4)
and the current battery level.
Power/Speed Button
Press and hold the button for
2 seconds to power ON the unit.
Once power is on, tap the button
to toggle through the 4 vibration
speed levels. Press and hold the
button for 2 seconds to power
OFF the unit
.
To Next Page
Loading...
