How to fix a Lifepro Massager that is not working?
If your Lifepro Massager isn't turning on, first ensure it is powered on by pressing the power button. If it still doesn't work, check the battery LEDs to see the charge level. If the battery is low, recharge it.
What to do if my Lifepro Massager stopped working suddenly?
There are several reasons why your Lifepro Massager might suddenly stop. It could be that the massager automatically shuts off after 15 minutes; simply turn it on again. Alternatively, the battery may be very low, so check the battery LEDs and recharge if needed. Finally, if the massager has been working for a long time, it may have shut off for overheating protection. In this case, allow it to cool for at least 30 minutes before using it again.
Why is the massage too strong on my Lifepro LEGRA?
If the massage from your Lifepro Massager feels too intense, try choosing one of the lower air pressure intensity levels, such as L1 or L2. Also, make sure your hand is correctly positioned in the massage chamber; adjust it until you find a comfortable spot.
Why is the massage too weak on my Lifepro LEGRA?
If the massage from your Lifepro Massager feels too weak, first check the battery LEDs and recharge the device if the battery is low. If the battery isn't the issue, try selecting a higher air pressure intensity level, such as L4 or L5.
Why does my Lifepro LEGRA work for a few seconds and then stop?
If your Lifepro Massager works for only a few seconds before stopping, the battery is likely very low or completely drained. Check the battery LEDs to determine the remaining charge and recharge the massager as needed.
Why is the heat not hot enough on my Lifepro LEGRA Massager?
If the heat from your Lifepro Massager isn't hot enough, first check the battery LEDs and recharge if needed. If the battery level is fine, consider that temperature perception can vary; try wearing thin gloves to increase the warmth you feel.
What to do if my Lifepro LEGRA Massager is making a noise but not working?
If your Lifepro Massager is making noise but not functioning, the battery is likely very low or has run out. Check the battery LEDs to determine the remaining charge and recharge the device if necessary.
Why is the heat too hot on my Lifepro LEGRA Massager?
If the heat from your Lifepro Massager feels too hot, turn the heat off for 5 minutes. Also, if the motor may have been working a long time, turn the massager off and allow to cool for at least 15 minutes.
Why is my Lifepro Massager only massaging the wrist area?
If your Lifepro Massager is only massaging the wrist area, it's likely that the wrist massage mode, P4, is selected. To change this, press the mode button to choose a different massage mode.
Why I hear a faint sound while using Lifepro LEGRA?
If you hear a faint sound while using your Lifepro Massager, it's likely due to the air compression or vibration features. This is a normal sound produced by the air compression motor.
Lists included items and initial setup actions before first use.
Instructions for charging the device and preparing it for massage.
Covers general usage guidelines, heat operation details, and critical safety precautions.
Step-by-step guide for charging the device and understanding battery indicators.
Table addressing common problems, their possible reasons, and how to resolve them.
Precautions related to power supply, charging, and battery handling.
To Next Page
General