Lifepro DynaSphere - DynaSphere Components and Charging; Initial Battery Charging; Attaching Massage Heads

PARTS OF THE DYNASPHERE
Massage
Attachment
(1 of 5)
Battery/Handle
Charging Port for the
AC Charging Adapter
USB Cell Phone
Charging Port
Power Switch
Twist the base of the handle
to power on/off the unit.
SoarFX Collection 9 8 DynaSphere User Manual Lifepro
FULLY CHARGE THE BATTERY
• Ensure the DynaSphere is OFF before
charging.
• Charge the battery fully (for up to
5 hours) before using your DynaSphere
for the first time.
• Connect the AC adapter to the
charging port on the bottom of
the handle.
• Plug the adapter into a wall outlet.
INSERT A MASSAGE ATTACHMENT
• Make sure the DynaSphere is fully
charged and powered OFF.
• Select the desired massage
attachment.
• Insert the stem of the attachment
into the nozzle of the DynaSphere.
• Press the massage attachment in
firmly to secure it.
• See ATTACHMENT & SPEED
OPTIONS on page 12.
EASY-START SETUP GUIDE
2
1
Speed Button
Press the button to toggle
through the 6 vibration
speed levels (1-6).
Speed Indicator LEDs
The 6 LEDs indicate
which vibration speed
level is selected (1-6).
Battery Indicator LEDs
The 6 LEDs indicate the current
battery level. When charging
the unit, the LEDs indicate
charging progress.