12 LifeSize Room User Guide
Including Multiple Sites in Calls
You can add participants to an existing call at any time. LifeSize Room supports 4-way video
calls (an original caller and three other sites) for easy addition of participants during a call.
You can add a second caller while the first call is connecting; you do not need to wait for the
first call to connect.
To add callers to an existing call, follow these steps:
1. When you are in a call, press the button to return to the main screen to add a new
caller.
An orange LED indicator displays in the Redial list to the left of the voice or video
numbers currently in a call.
2. Select a number to call from the Redial list and press OK, or select the Voice or Video
buttons and enter a new number to call.
Note: You can also press the Add key on the speakerphone keypad and enter the
new number to call. If a call using PSTN connectivity is connected, you must use the
remote control to add calls.
3. Refer to “Ending a Call” on page 11 for options of ending individual calls or all calls.
Automatically Answering Calls
You can set the Auto Answer user preference to connect an incoming call automatically.
You can also specify to mute an auto answered call.
Refer to “User Preferences” on page 21 for more information.
Auto Answer If set to Enabled, the system automatically answers the first
incoming call. If set to Disabled (the default), you must
manually answer incoming calls.
Auto Answer Mute If this preference and the Auto Answer preference are set
to Enabled (the default), the system is muted when the call
connects.
Auto Answer Multiway
Call
If set to Enabled (the default), the system automatically
answers incoming calls after the first call has connected.
The system beeps to indicate a new call has connected.
To Next Page
Loading...
