LifeSpan BOOST - Page 7

7
BOOST
STEP 1:
STEP 2:
STEP 3:
1. Open the carton
2. Extract the parts listed above
3. Place the Main Frame onto level
ground
1. Use the 5# Allen Wrench (65),
M8*15 bolt (70) and lock washer
(95) to lock the upright tube (B) onto
MAIN FRAME (1).
1. Erect the Computer (A) and Upright tube
(B) in the direction of the arrows
Note: As you erect the display, make sure that
you do not damage the wires between the
tubes.