Lifetime 125 - Page 24

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
24
SEC
Only use a hand screwdriver on
this step
SEC
5.3
Connect the Center Roof Panels, Roof Support Strips, and Center Roof Cap you removed previously as well as
the Center Roof Panels (AGQ), Roof Support Strips (AFL), and Center Roof Cap (AFY) provided with this kit using 1/4” x 5/8”
Phillips Pan-Head Screws (ADZ), #10 x 5/8” Phillips Pan-Head Screws (ACJ), and #10 x 1” Fender Washers (AED).
Note: Only use a hand screwdriver on this step.
!
ADZY
5
ACJ (x4)
AED (x4)
28 7/8”
AFL
The hole at the end of the Roof Support is for
manufacturing purposes only.