Lifetime 60066 - Step 2.1: Attach the Mounting End Plate

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
15
SEC
SEC
2.1
!TTACHTHEMounting End Plate (BHP)WITHTHEWARNINGSTICKERTOANEnd Panel (BHM)WITHTHEWARNINGSTICKERJUSTBELOW
THE,IFETIMELOGOUSINGTHREEvXv#ARRIAGE"OLTS")2THREE5/16” Steel Flat Washers (BHO)ANDTHREE
5/16” Cap Nuts (AAN)ASSHOWNRepeat this step for the second End Panel.
TUMBLER ASSEMBLY
2
BIRX
BHOX
AANX
AAN
AAN
AAN
BHO
BHO
BHO
BIR
BHM
BIR
BIR
BHP
Warning Sticker
1/2”
The extruded end of the Mounting End Plate
goes toward the Tumbler.