Lifetime 60066 - Step 2.2: Assemble Washer, Sleeve, and Bolt; Step 2.3: Apply Grease

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
16
SEC
2
SEC
2.2
SEC
2.3
3LIDEA1/2” Flat Washer (BIO)Sleeve (BIL)AND5/8” Flat Washer (BIP) over a vXv(EX(EAD"OLT")+.
4EAROPENTHEGrease Packet (AKH)ANDAPPLY'REASEAROUNDTHE3LEEVEASSHOWNRepeat steps 2.2 - 2.3 for the second
set of Washers, Bushing, Sleeve, and Hex Bolt.
Tear here
BIK
BIO
BIL
BIP
BILX
BIKX
v
BIOX
BIPX
AKH