42
TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS
X SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN)
ADZ (x30)
AIW (x1)
8.6
8.8
8.7
• For the right, rear Corner Panel (AGY), repeat the step you did for the right, front Corner Panel.
• Pour le panneau angulaire (AGY) arrière droit, répétez les étapes que vous avez réalizé pour le panneau angulaire
avant droit.
• Para el panel angular (AGY) trasero derecho, repita los pasos que se efectuaron para el panel angular delantero
derecho.
AGY
AGW
AHD
AHD
AHD
AHD
AHD
• Insert Wall Panels (AHD) along the rear of the Floor
one at a time, and slide them to the right. Secure
with Screws (ADZ).
• Insérez les panneaux muraux (AHD) le long du bord
arrière du plancher un par un, et glissez-les à la
droite. Attachez-les bien à l’aide des vis (ADZ).
• Inserte unos paneles murales (AHD) a lo largo del
borde trasero del piso uno por uno, y deslícelos a
la derecha. Sujételos los unos con los otros usando
los tornillos (ADZ).
• For the left, rear Corner Panel (AGW), repeat the step
you did for the right, front Corner Panel.
• Pour le panneau angulaire (AGW) arrière gauche,
répétez les étapes que vous avez réalizé pour le
panneau angulaire avant droit.
• Para el panel angular (AGW) trasero izquierdo, repita
los pasos que se efectuaron para el panel angular
delantero derecho.