10
X SECTION 1 (CONTINUED) / SECCIÓN 1 (CONTINUACIÓN) / SECTION 1 (SUITE)
46 1/4" x 93 1/2" x 3/4"
(118 cm x 2,38 m x 19,1 mm)
8d 2" (8d 5,08 cm) (x96)
x96
48" x 93 1/2" x 3/4"
(1,22 m x 2,38 m x 19,1 mm) (x4)
1
!
A = B
!
!
46 1/4" x 93 1/2" x 3/4"
(118 cm x 2,38 m x 19,1 mm) (x1)
x45!
Drainage Holes
Agujeros para canalización
Trous de drainage
• Square the frame, measuring
from corner to corner. Measurement
A & B should be about the same length.
• Cuadre el armazón mediendo de
esquina a esquina. La medida "A"
y "B" deben ser approximadamente el
mismo largo.
• Carrez le cadre en mesurant
d’angle à angle. La mesure " A " et
" B " doivent être à peu près la même
longeur.
• Using nails, fasten the plywood
to the frame. Then, drill 5/16" (8
mm) holes for drainage.
• Usando unos clavos, sujete
el contrachapado al armazón.
Entonces, taladre agujeros de 8
mm para el drenaje.
• En utilisant des clous, attachez
bien le contreplaqué au cadre.
Ensuite, percez des trous de 8
mm pour le drainage.
1.2.3
1.2.4
TOOLS, PARTS, AND HARDWARE REQUIRED / INSTRUMENTAL, PIEZAS, Y HERRAJE REQUERIDOS / OUTILS, PIÈCES, ET QUINCAILLERIE
REQUIS
A
B
48" x 93 1/2" x 3/4"
(1,22 cm x 2,38 m x 19,1 mm)